izpis_h1_title_alt

Elasto-hydrodynamic friction changes on steel surfaces arising from the modified surface energy of the steel due to additive boundary films
ID Polajnar, Marko (Avtor), ID Thiébaut, Benoît (Avtor), ID Jarnias, Frederic (Avtor), ID Kalin, Mitjan (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,93 MB)
MD5: 0320362DE79294BF00CAB4EE83B50D11
URLURL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0301679X21003510 Povezava se odpre v novem oknu

Izvleček
The effect of three different film-forming additives mixed in PAO oil on the elasto-hydrodynamic (EHD) friction was investigated and compared to cases with the base oil only. When the boundary films were formed on the surfaces, the organic friction modifier (OFM) decreased the EHL friction by up to 8.7%, the ionic liquid (IL) decreased it by up to 6.4%, while the polymeric organic friction modifier (pOFM) increased it by up to 4.2%. In contrast, if the boundary films were not formed, the EHL friction remained the same as with the base oils only. The oils` surface tension and viscosity were analysed at 25 °C and 100 °C as potential influencing effects, and the most important parameter for friction changes was found to be the surface energy. The mechanism behind this EHL friction reduction is, therefore, the effect of the boundary films on the poor oil-surface wetting and the consequent boundary slip. This study confirms the poor wetting arising from additive boundary-film formation as a relevant EHL friction-reduction mechanism. This observation is similar to that observed previously for surface coatings, thus suggesting that the boundary films of the surface-energy-reducing additives is a parameter with the potential to reduce the EHL friction.

Jezik:Angleški jezik
Ključne besede:elastohydrodynamic, lubricant additive, traction, wetting
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Recenzirani rokopis
Leto izida:2021
Št. strani:Str. 1-10
Številčenje:Vol. 164, art. 107203
PID:20.500.12556/RUL-129017 Povezava se odpre v novem oknu
UDK:531.43:669.14:544.722.3
ISSN pri članku:0301-679X
DOI:10.1016/j.triboint.2021.107203 Povezava se odpre v novem oknu
COBISS.SI-ID:73795843 Povezava se odpre v novem oknu
Datum objave v RUL:24.08.2021
Število ogledov:944
Število prenosov:75
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Tribology international
Skrajšan naslov:Tribol. int.
Založnik:Elsevier
ISSN:0301-679X
COBISS.SI-ID:26558976 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
Opis:Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.
Začetek licenciranja:24.07.2021

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:elastohidrodinamika, aditivi za maziva, trenje, omočljivost

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:Z2-1868
Naslov:Nova zasnova EHD kontaktov z upoštevanjem pojavov na stiku trdno-tekoče

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0231
Naslov:Tribologija

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj