Reduction of stresses and mass of an engine rubber mount subject to mechanical vibrations

Dávalos, Omar (avtor), Caldiño-Herrera, Uzziel (avtor), Cornejo-Monroy, Delfino (avtor), Tenango-Pirin, Oscar (avtor), García, Juan Carlos (avtor), Basurto-Pensado, M. A. (avtor)

A rubber engine mount (EM) is a mechanical coupling between the engine and the chassis, and its main function is to diminish, in the chassis, the amplitude of vibrations caused for the engine operation. Such vibrations cause discomfort for vehicle passengers and reduce the EM lifetime. To increase the comfort of vehicle passengers and the lifetime of the EM, this paper presents an EM optimization by means of reducing three main criteria: the EM mass, the displacements transmitted to the chassis, and the mechanical stress in the EM rubber core. For carrying out the EM optimization, the optimum global determination by linking and interchanging kindred evaluators (GODLIKE), assisted by artificial neural networks (ANN) and finite element method (FEM), was used. Because of the optimization process, a reduction greater than 10 % was achieved in the three criteria in comparison with a baseline design. The frequency responses were compared and showed that although the optimization was carried out for the range of 5 Hz to 30 Hz the trend of reduced responses continues beyond this range. These results increased the comfort of vehicle passengers and the lifetime of the EM; in addition, the reduction of mass diminishes its production costs.

• Jezik: Angleški jezik
• Ključne besede: multi-objective optimization, vehicle engine mount, ANN, FEM, global optimum determination
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: Str. 101-113
• Številčenje: Vol. 67, no. 3
• PID: 20.500.12556/RUL-127811
• UDK: 531.222:519.6
• ISSN pri članku: 0039-2480
• COBISS.SI-ID: 67989251
• Datum objave v RUL: 23.06.2021

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Zmanjšanje mase in napetosti v gumijastem nosilcu motorja pod vplivom mehanskih vibracij
• Ključne besede: večciljna optimizacija, nosilec motorja, umetna nevronska mreža, MKE, določitev globalnega optimuma, vibracije