Modelling of flexible adhesives in simple mechanical states with the use of the Darijani–Naghdabadi strain tensors and Kirchhoff–de Saint-Venant elastic potential

Szeptyński, Paweł (avtor), Gams, Matija (avtor), Kwiecień, Arkadiusz (avtor)

Practical aspects of modelling of flexible adhesives with the energy conjugate measures of stress and strain of the Darijani–Naghdabadi (D-N) family are discussed. A possibility of description of materials exhibiting non-linear physical characteristics with the use of non-linear geometric relationships and linear elastic constitutive law is considered. Nominal stress vs. stretch relations are specified in cases of simple tension and simple shear with the use of the Kirchhoff–de Saint-Venant elastic potential and D-N energy conjugate stress and strain measures. Obtained theoretical estimates were compared with experimental results of simple tension and simple shear tests performed on Sika PM polyurethane (Cracow, Sika Poland). The deformation rate was fixed in order to minimize the influence of viscosity. Values of parameters α, β in the definition of the D-N strain tensor were optimized in order to provide good agreement between model predictions and experimental results. Observed discrepancies indicate that the proposed approach is not appropriate for constitutive modelling of the PM polymer. The presented approach is proposed to be used as a simple design model providing practical formulas describing the behavior of materials of non-linear characteristics in chosen mechanical states. Admissible values of exponents α, β are discussed regarding its bijectivity in a limited range of variation of principal stretches.

• Jezik: Angleški jezik
• Ključne besede: generalized measures of strain, nonlinear elasticity, flexible adhesives
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FGG - Fakulteta za gradbeništvo in geodezijo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: 18 str.
• Številčenje: Vol. 13, iss. 10, art. 1639
• PID: 20.500.12556/RUL-127202
• UDK: 539.37
• ISSN pri članku: 2073-4360
• DOI: 10.3390/polym13101639
• COBISS.SI-ID: 64333827
• Datum objave v RUL: 24.05.2021

Gradivo je del revije

• Naslov: Polymers
• Skrajšan naslov: Polymers
• Založnik: MDPI
• ISSN: 2073-4360
• COBISS.SI-ID: 517951257

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 18.05.2021

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: posplošene mere deformacij, nelinearna elastičnost, podajna lepila