izpis_h1_title_alt

Preizkušanje elektromagnetne kompatibilnosti LED avtomobilskih svetil
ID MARKELJC, MATIJA (Avtor), ID Bizjak, Grega (Mentor) Več o mentorju... Povezava se odpre v novem oknu

.pdfPDF - Predstavitvena datoteka, prenos (3,60 MB)
MD5: D2ECD0FCD5B539004B7F889B87EAAEDE

Izvleček
V magistrski nalogi so predstavljeni standardi in metode testiranja za zagotavljanje elektromagnetne kompatibilnosti v avtomobilski industriji. Predstavljene so tudi primerjalne meritve dveh različnih testnih metod, ki sem jih naredil v želji, da ugotovim, ali se da s pomočjo dobljenih rezultatov katero od merilnih metod v pred fazah testiranja izpustiti in s tem pohitriti čas testiranja ter zmanjšati stroške testiranja. Na samem začetku je na nekoliko preprostejši način predstavljena elektromagnetna kompatibilnost (kaj je in kaj so elektromagnetne motnje). Sledijo ji predstavitve mednarodnih standardov, ki jih uporabljamo za preverjanje odpornosti testnega vzorca in preverjanje kaj sam vzorec oddaja v okolico. Podrobneje sem se osredotočil na merilni metodi »stripline« in »radiated immunty«, kajti ti dve metodi sem izbral za primerjavo na testnih vzorcih. Opisane so vse zahteve za pripravo komore, kalibracijo električnega polja, pripravo vzorca in samega vsiljenega signala. Dobljene rezultate sem predstavil z grafi in jih analiziral. Ugotovil sem, da so odzivi na treh testnih svetilkah zelo podobni in se med seboj povezujejo.

Jezik:Slovenski jezik
Ključne besede:Elektromagnetna kompatibilnost, odpornost naprave na EM motnje, oddajanje motenj, mednarodni standard ISO 11452, merilne metode, primerjalne meritve
Vrsta gradiva:Magistrsko delo/naloga
Organizacija:FE - Fakulteta za elektrotehniko
Leto izida:2021
PID:20.500.12556/RUL-125337 Povezava se odpre v novem oknu
Datum objave v RUL:11.03.2021
Število ogledov:1235
Število prenosov:140
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Sekundarni jezik

Jezik:Angleški jezik
Naslov:Testing of the electromagnetic compatibility of LED car lights
Izvleček:
This master's thesis presents standards and methods of testing to ensure electromagnetic compatibility in the car industry. I made comparative measurements of two different test methods to discover if one of them can be omitted in a pre-testing phase (using my findings). In this case, we could accelerate testing time and lower expenses of testing. At the beginning of the thesis, electromagnetic compatibility is presented – what is exactly and what are the electromagnetic interferences. This is followed by the international standards, which are used to test electromagnetic resistance of test samples, including what the sample emits to the environment. In detail I have focused on the following test methods; »Stripline« and »Radiated immunity«, considering these two (methods) my own choice for comparison of test samples. In thesis, all criteria for chamber preparation, calibration of the electric field, preparation of the test sample along with an imposed signal are described. I have presented my findings with graphs and then analysed them. Results show that responses on the three test lamps are very similar and comparable to each other.

Ključne besede:electromagnetic compatibility, device electromagnetic resistance, interference emission, international standard ISO 11452, test methods, comparative measurement

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj