izpis_h1_title_alt

Razvoj in proizvodnja lesene talne obloge za plovila z uporabo 3D skenerja in programske opreme SolidWorks in SWOOD
Buh, Klemen (Avtor), Kitek Kuzman, Manja (Mentor) Več o mentorju... Povezava se odpre v novem oknu

.pdfPDF - Predstavitvena datoteka, prenos (5,56 MB)
MD5: 04015B2358F074B23AA5A821A6EEB67C

Izvleček
Glavni namen diplomskega dela je bil konstruiranje, izdelava in vgradnja lesene talne obloge iz tikovine za plovilo. Postopek izdelave talne obloge smo želeli čim bolj optimizirati, zato je bilo potrebno poiskati konstrukcijske rešitve, s katerimi lahko izdelamo kvalitetno predpripravljeno talno oblogo, ki bo zadostovala tako estetskim kot mehansko-tehnološkim zahtevam. Talno oblogo smo zaradi posebno zahtevne oblike izdelali iz večjega števila elementov, ki smo jih s pomočjo CNC tehnologije rezkali iz že prej pripravljenih elementov; letvice smo pritrdili na šablono zaradi lažjega vpenjanja na stroj in samega postopka lepljenja. Za natančen zajem geometrijskih podatkov kompleksnih površin smo uporabili 3D lasersko skeniranje v kombinaciji z dodatno metodo izvajanja meritev s šablonami. Ugotovili smo, da je ta način dela primeren za izdelavo kompleksnih talnih oblog za plovila. Konstruiranje je potekalo s programsko opremo SolidWorks, SWood in AutoCAD. Metoda izdelave predizdelanih segmentov talne obloge s CNC strojem je bila za ta namen zelo primerna, saj smo z njo zagotavljali veliko natančnost izdelave talne obloge in ob vgradnji v plovilo ni prihajalo do težav.

Jezik:Slovenski jezik
Ključne besede:tik, talne obloge, navtika, plovila, les, predizdelava, 3D lasersko skeniranje, SolidWorks
Vrsta gradiva:Diplomsko delo/naloga (mb11)
Tipologija:2.11 - Diplomsko delo
Organizacija:BF - Biotehniška fakulteta
Leto izida:2020
Založnik:[K. Buh]
UDK:630*833.18
COBISS.SI-ID:43624195 Povezava se odpre v novem oknu
Število ogledov:159
Število prenosov:48
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Sekundarni jezik

Jezik:Angleški jezik
Naslov:Development and production of wooden boat decking using a 3D scanner and the software SolidWorks and SWOOD
Izvleček:
The main purpose of the thesis was the design, manufacture and installation of wooden teak decking for a boat. We wanted to optimize the process of making the wooden boat decking as much as possible, so it was necessary to find construction solutions with which we could make a quality pre-prepared boat decking that would meet both aesthetic and mechanical-technological requirements. Due to the specially demanding shape, the decking was made of a large number of elements, which were milled from previously prepared elements with the help of CNC technology; the slats were attached to the substructure for easier fastening to the machine and for the ease of the gluing process itself. To accurately capture the geometric data of complex surfaces, we used 3D laser scanning in combination with an additional method of taking measurements with templates. We found that this way of working is suitable for the production of complex wooden boat decking. The construction was done with SolidWorks, SWood and AutoCAD software. The method of making prefabricated wooden boat decking segments with a CNC machine was very suitable for this purpose, as it ensured high accuracy in the production of the floor covering, and there were no problems when installing it on the vessel.

Ključne besede:teak, flooring, nautics, boats, wood, pre-fabrication, 3D laser scanning, SolidWorks

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj