Vaš brskalnik ne omogoča JavaScript!
JavaScript je nujen za pravilno delovanje teh spletnih strani. Omogočite JavaScript ali pa uporabite sodobnejši brskalnik.
Nacionalni portal odprte znanosti
Odprta znanost
DiKUL
slv
|
eng
Iskanje
Brskanje
Novo v RUL
Kaj je RUL
V številkah
Pomoč
Prijava
ACR in dolomitic aggregate concrete for an autogenous self-healing process
ID
Štukovnik, Petra
(
Avtor
),
ID
Bokan-Bosiljkov, Violeta
(
Avtor
),
ID
Marinšek, Marjan
(
Avtor
)
PDF - Predstavitvena datoteka,
prenos
(3,63 MB)
MD5: FFAD4475FCB69E8280B7D1B2D65A203A
Galerija slik
Izvleček
This paper investigates the process of alkali-carbonate reaction (ACR) in dolomite aggregate concrete in view of its potential as a self-healing process. Samples for the ACR self-healing study were prepared using a cement composite with self-compacting properties in fresh state. The mixture was composed of Portland cement CEM I and typical Slovenian crushed dolomite aggregate in the role of aggregate and stone filler. Samples were subsequently exposed to accelerated testing conditions simulated by 1-M NaOH at 60 °C or deionized water at 60 °C. The conducted research revealed that the complete ACR process was successfully triggered, including the dedolomitization and formation of secondary phases, i.e., CaCO3 called "carbonate halo", Ca-Al-involving phase and some minor phases containing Mg-Al, Mg-Si and/or Mg-Al-Si. Additionally, the "carbonate halo" and Ca-Al-involving phase also precipitated inside purposely preformed cracks in the samples. Smaller cracks up to 200 %m in width were completely filled with the "carbonate halo" and Ca-Al-involving phase. Wider cracks may not have been completely filled with the newly precipitated phases; however, their length and width were also successfully reduced. With filling of the pores and cracks, the mechanical strength of the cement composite was increased substantially due to the ACR self-healing process.
Jezik:
Angleški jezik
Ključne besede:
alkali carbonate reaction (ACR)
,
self-healing
,
dedolomitisation
,
formation of new phases
,
mechanical strength
Vrsta gradiva:
Znanstveno delo
Tipologija:
1.01 - Izvirni znanstveni članek
Organizacija:
FGG - Fakulteta za gradbeništvo in geodezijo
Status publikacije:
Objavljeno
Različica publikacije:
Objavljena publikacija
Leto izida:
2020
Št. strani:
Str. 379-384
Številčenje:
Letn. 54, št. 3
PID:
20.500.12556/RUL-120769
UDK:
67.017
ISSN pri članku:
1580-2949
DOI:
10.17222/mit.2019.196
COBISS.SI-ID:
20433155
Datum objave v RUL:
25.09.2020
Število ogledov:
1815
Število prenosov:
356
Metapodatki:
Citiraj gradivo
Navadno besedilo
BibTeX
EndNote XML
EndNote/Refer
RIS
ABNT
ACM Ref
AMA
APA
Chicago 17th Author-Date
Harvard
IEEE
ISO 690
MLA
Vancouver
:
Kopiraj citat
Objavi na:
Gradivo je del revije
Naslov:
Materiali in tehnologije
Skrajšan naslov:
Mater. tehnol.
Založnik:
Inštitut za kovinske materiale in tehnologije
ISSN:
1580-2949
COBISS.SI-ID:
106193664
Sekundarni jezik
Jezik:
Slovenski jezik
Naslov:
Vpliv ACR-reakcije na avtogeno celjenje betonov z dolomitnim agregatom
Ključne besede:
alkalno karbonatna reakcija (ACR)
,
samoceljenje
,
dedolomitizacija
,
oblikovanje novih faz
,
mehanska trdnost
Projekti
Financer:
ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:
J2-9196
Naslov:
Masivni betoni - optimiziranje tehnologije ob uporabi naprednih preskusnih metod
Podobna dela
Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:
Nazaj