izpis_h1_title_alt

Rapid detection of active nucleation sites in pool boiling experiments based on analysis of transient temperature fields
ID Pečnik, Tim (Avtor), ID Zupančič, Matevž (Avtor), ID Gregorčič, Peter (Avtor), ID Golobič, Iztok (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (620,54 KB)
MD5: 44E95A48693F95DB52EFD9B62F98807A

Izvleček
It is well known, that water, when heated above its saturation temperature, boils. Anyone can observe boiling by simply pouring the water into a cooking pot and placing it onto the stove. Despite its virtual simplicity, the boiling process is a complex phenomenon governed by many underlying heat and mass transfer mechanisms. In-depth study of boiling process requires information about bubble departure and footprint diameter, nucleation frequency, nucleation site density and nucleation site distribution. Acquiring this information usually takes a lot of time and manual work during the post-processing phase. Development of robust and fast data processing algorithms is therefore highly appreciated by the scientific community. In this work, we developed new algorithm to detect active nucleation sites based on the transient temperature fields obtained by high-speed IR camera during saturated boiling experiments on thin metal foil. Results show that this method offers a robust and rapid detection of active nucleation sites, which can be later implemented in a more complex image processing algorithms.

Jezik:Angleški jezik
Ključne besede:pool boiling, high-speed IR thermography, laser surface engineering, image processing
Vrsta gradiva:Drugo
Tipologija:1.08 - Objavljeni znanstveni prispevek na konferenci
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2020
Št. strani:Str. 103-110
PID:20.500.12556/RUL-120206 Povezava se odpre v novem oknu
UDK:536.24:004.946:681.518.52(045)
COBISS.SI-ID:28556803 Povezava se odpre v novem oknu
Datum objave v RUL:17.09.2020
Število ogledov:1874
Število prenosov:137
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del monografije

Naslov:ŠTeKam : Študentska tehniška konferenca
Uredniki:Tomaž Berlec, Miha Brojan, Boštjan Drobnič
Kraj izida:Ljubljana
Založnik:Fakulteta za strojništvo
Leto izida:2020
ISBN:978-961-6980-71-5
COBISS.SI-ID:27402243 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:vrenje v bazenu, hitrotekoča IR termografija, laserski inženiring površin, strojna obdelava slik

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0223
Naslov:Prenos toplote in snovi

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0392
Naslov:Optodinamika

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:J2-1741
Naslov:Lasersko mikro in nanostrukturiranje za razvoj biomimetičnih kovinskih površin z edinstvenimi lastnostmi (LaMiNaS)

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj