izpis_h1_title_alt

Tensile properties of mineral fibers determined with Sentmanat extensional rheometer
ID Oseli, Alen (Avtor), ID Bizjan, Benjamin (Avtor), ID Król, Elżbieta (Avtor), ID Širok, Brane (Avtor), ID Slemenik Perše, Lidija (Avtor)

.docxDOCX - Predstavitvena datoteka, prenos (2,16 MB)
MD5: 2EC75E6DF9816D1F92FE2BBEA57C5C28
URLURL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/abs/pii/S0950061820312204#! Povezava se odpre v novem oknu

Izvleček
Within the presented research, we utilized a non-standard technique, i.e. Sentmanat Extensional Rheometer (shorter SER-tool), which can potentially provide tensile measurements (i.e. tensile strength and Young's modulus) on relatively short and brittle fibrous materials such as slag mineral fibers. For easier transportation and fastening of the fibers, physical model of SER-tool was slightly modified. Consequently, modified technique was theoretically (through parametric error analysis) and experimentally (through mechanical characterization) evaluated on four different types of mineral fibers. Despite a fair, yet distinguishable scatter of tensile strength which cannot be theoretically evaluated due to size effect (related to thermo-mechanical histories), fiber's weakest link (related to fiber defects), etc., mechanical response, which is universally presented by Young's modulus, was reproducible. Parametrical error analysis, which determines the accuracy of modified SER-tool showed that the large part of the error arises from the combination of fiber diameter and error in fiber diameter, however by careful selection of fibers (related to the magnitude of the diameter and its error) the result remains within the predicted ranges. From the results different types of mechanical responses can be observed, which is related to ceramic content, i.e. SiO2+Al2O3, within the slag fiber. Utilized technique demonstrates the high performance and the capability of modified SER-tool to perform various studies, investigating the effects of thermo-mechanical histories, chemical composition and other parameters on mechanical properties of single fiber filaments.

Jezik:Angleški jezik
Ključne besede:slag mineral fibers, chemical composition, mechanical properties, tensile strength, Young's modulus, Sentmanant extensional rheometer
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Recenzirani rokopis
Leto izida:2020
Št. strani:Str. 1-12
Številčenje:Vol. 253
PID:20.500.12556/RUL-115997 Povezava se odpre v novem oknu
UDK:539.412(045)
ISSN pri članku:0950-0618
DOI:10.1016/j.conbuildmat.2020.119215 Povezava se odpre v novem oknu
COBISS.SI-ID:13922563 Povezava se odpre v novem oknu
Datum objave v RUL:06.05.2020
Število ogledov:1250
Število prenosov:131
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:mineralna vlakna iz žlindre, kemična sestava, mehanske lastnosti, natezna trdnost, Yangov modul, natezni reometri

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0264
Naslov:Trajnostni Polimerni materiali in Tehnologije

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0401
Naslov:Energetsko strojništvo

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj