Podrobno

The effect of feedstock, knife wear and work station on the exposure to noise and vibrations in wood chipping operations
ID Poje, Anton (Avtor), ID Spinelli, Raffaele (Avtor), ID Magagnotti, Natascia (Avtor), ID Mihelič, Matevž (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,06 MB)
MD5: D73ECABD6561E792D31A68D73E74CFC7
URLURL - Izvorni URL, za dostop obiščite https://www.silvafennica.fi/article/7003 Povezava se odpre v novem oknu

Izvleček
Industrial chipping is becoming increasingly popular, as the result of a growing demand for woody biomass. Industrial chippers are large, powerful machines that generate much noise and vibration. This study explored some factors that may affect exposure to noise and vibration, namely: feedstock type (branches vs. logs), work station characteristics (truck cab vs. separate cab) and knife wear (new knives vs. blunt knives). Exposure to noise was significantly affected by all three factors, and it was higher for branch feedstock, separate cabs and blunt knives. The higher exposure levels recorded for the separate cab were especially insidious, because they were below and above the hearing threshold and would elude immediate perception. Exposure to whole-body vibration (WBV) was significantly higher for branch feedstock and for the separate cab. Knife wear seemed to determine an increase in WBV, but this effect had no statistical significance and the result could not be taken as conclusive. Among the three factors studied, work station characteristics had the strongest effect. Further studies may extend the comparison to a wider range of options, as well as explore the use of exposure variation for machine diagnostics.

Jezik:Angleški jezik
Ključne besede:biomass, fuelwood, ergonomics, safety
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:BF - Biotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2018
Št. strani:14 str.
Številčenje:Vol. 52, no. 1, art. 7003
PID:20.500.12556/RUL-114174 Povezava se odpre v novem oknu
UDK:630*83
ISSN pri članku:2242-4075
DOI:10.14214/sf.7003 Povezava se odpre v novem oknu
COBISS.SI-ID:5071526 Povezava se odpre v novem oknu
Datum objave v RUL:19.02.2020
Število ogledov:17337
Število prenosov:327
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Silva Fennica
Založnik:Finnish Society of Forest Science
ISSN:2242-4075
COBISS.SI-ID:520811289 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-SA 4.0, Creative Commons Priznanje avtorstva-Deljenje pod enakimi pogoji 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-sa/4.0/deed.sl
Opis:Ta licenca Creative Commons je zelo podobna običajni licenci Priznanje avtorstva, vendar zahteva, da so materialne avtorske pravice na izpeljanih delih upravljane z enako licenco.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:biomasa, lesna goriva, sekalnik, tresenje

Projekti

Financer:Regione Piemonte
Številka projekta:MCV2

Financer:EC - European Commission
Program financ.:Structural funds

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj