Sustainability assessment of advanced machining technologies

Sterle, Luka (avtor), Grguraš, Damir (avtor), Kern, Matjaž (avtor), Pušavec, Franci (avtor)

Efficient cooling and lubrication techniques are required to obtain sustainable machining of difficult-to-cut materials, which are the pillars of aerospace, automotive, medical and nuclear industries. Cryogenic machining with the assistance of lubricated Liquid Carbon Dioxide (LCO2) is a novel approach for sustainable manufacturing without the use of harmful water-based metalworking fluids (MWFs). In case of unavoidable use of MWFs under high pressure, such as turning finishing processes of difficult-to-cut materials, the pulsating high pressure delivery of MWFs prolongs the tool life and enables the control over chip length to prevent surface damage of high value-added parts. In this paper, sustainability assessment of both advanced principles was carried out, considering overall costs and operational safety. Experimental tests were executed on difficult-to-cut materials in comparison to conventional flood lubrication. For both techniques, longer tool life compared to flood lubrication was observed additional cleaner production and higher part quality led to reduced long-term overall costs. These advanced machining technologies are also operation safe, proving to be a sustainable alternative to conventional machining.

• Jezik: Angleški jezik
• Ključne besede: cryogenic machining, high pressure machining, sustainability, cost assessment, risk assessment
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2019
• Št. strani: Str. 671-679
• Številčenje: Vol. 65, no. 11/12
• PID: 20.500.12556/RUL-113738
• UDK: 621.9(045)
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2019.6351
• COBISS.SI-ID: 16944155
• Datum objave v RUL: 30.01.2020

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Ocena trajnosti naprednih tehnologij odrezavanja
• Ključne besede: kriogeno odrezavanje, visokotlačno odrezavanje, trajnost, stroškovna analiza, analiza varnosti

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Program financ.: Programska skupina
• Številka projekta: L2-8184
• Naslov: Razvoj in implementacija kriogenega odrezavanja v serijsko proizvodno za povečanje produktivnosti procesov vrtanja in frezanja

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Program financ.: Programska skupina
• Številka projekta: P2-0266
• Naslov: Napredne izdelovalne tehnologije za visoko kakovostno in trajnostno proizvodnjo