Podrobno

Numerical modelling of behaviour of reinforced concrete columns in fire and comparison with Eurocode 2
ID Bratina, Sebastjan (Avtor), ID Čas, Bojan (Avtor), ID Saje, Miran (Avtor), ID Planinc, Igor (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,50 MB)
MD5: D3FCB439CE295136BAD35C791A400324
PID: 20.500.12556/rul/06b98542-984d-47fb-acf7-42f862056461

Izvleček
The paper describes a two-step finite element formulation for the thermo-mechanical non-linear analysis of the behaviour of the reinforced concrete columns in fire. In the first step, the distributions of the temperature over the cross-section during fire are determined. In the next step, the mechanical analysis is made in which these distributions are used as the temperature loads. The analysis employs our new strain-based planar geometrically exact and materially non-linear beam finite elements to model the column. The results are compared with the measurements of the full-scale test on columns in fire and with the results of the European building code EC 2. The resistance times of the present method and the test were close. It is also noted that the building code EC 2 might be non-conservative in the estimation of the resistance time. (c) 2005 Elsevier Ltd. All rights reserved.

Jezik:Angleški jezik
Ključne besede:fire resistance, finite element method, reinforced concrete column, thermal strain, creep strain, transient strain, Eurocode 2
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FGG - Fakulteta za gradbeništvo in geodezijo
Založnik:Elsevier
Leto izida:2005
Št. strani:Str. 5715-5733
Številčenje:Letn. 42, št. 21-22
PID:20.500.12556/RUL-32157 Povezava se odpre v novem oknu
UDK:006(4):614.84:624.012.45:624.075.2
ISSN pri članku:0020-7683
DOI:10.1016/j.ijsolstr.2005.03.015 Povezava se odpre v novem oknu
COBISS.SI-ID:2813793 Povezava se odpre v novem oknu
Datum objave v RUL:10.07.2015
Število ogledov:3679
Število prenosov:1120
Metapodatki:XML DC-XML DC-RDF
:
BRATINA, Sebastjan, ČAS, Bojan, SAJE, Miran in PLANINC, Igor, 2005, Numerical modelling of behaviour of reinforced concrete columns in fire and comparison with Eurocode 2. International journal of solids and structures [na spletu]. 2005. Vol. 42, no. 21–22, p. 5715–5733. [Dostopano 24 marec 2025]. DOI 10.1016/j.ijsolstr.2005.03.015. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=32157
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:International journal of solids and structures
Skrajšan naslov:Int. j. solids struct.
Založnik:Pergamon Press
ISSN:0020-7683
COBISS.SI-ID:997903 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Angleški jezik
Ključne besede:požarna odpornost, metoda končnih elementov, armiranobetonski stebri, temperaturna deformacija, lezenje, prehodna deformacija, Eurocode 2

Podobna dela

Podobna dela v RUL:
  1. Design of shopping centre
  2. Design of steel column bases
  3. Dissipative elements in seismic resistant steel structures
  4. Limit load of bolted connections
  5. Analysis of steel building considering membrane action of slab during fire
Podobna dela v drugih slovenskih zbirkah:
  1. THREE-STOREY BUSINESS STEEL BUILDING 21 X 35 M
  2. Vrednotenje, statična analiza in dimenzioniranje jeklene hale 15/48/10 m z mostnim žerjavom nosilnosti 200 kN
  3. Jeklena hala 2x16x35m s polnostenskimi nosilci in stebri iz jekla Fe 360 ter mostnima žerjavoma nosilnosti 50kN
  4. Jeklena hala 15,00m x 48,00m s paličnimi nosilci na polnostenskih stebrih iz jekla Fe 430 in mostnim žerjavom nosilnosti 200 kN
  5. Jeklena hala 30m x 48m s polnostenskimi nosilci in stebri iz jekla Fe 510 brez žerjava

Nazaj