Numerično modeliranje poladiabatnega poskusa

Ilc, Anka (avtor), Turk, Goran (avtor), Trtnik, Gregor (avtor)

The paper deals with the possibility of using a semi-adiabatic test to determine the adiabatic hydration curve of concrete mixtures. Therefore, a temperature was measured at certain points of a concrete specimen during the test and an adiabatic temperature rise was estimated with a numerically determined heat loss compensation. The determined adiabatic hydration curve was inserted into a numerical program, which is used to calculate a temperature field within the concrete element using a finite element method. Acomparison between numerically and experimentally determined values indicatesthe adequacy of the proposed numerical model. Moreover, the semi-adiabatic test proved to be an appropriate method to determine the adiabatic temperature rise.

• Jezik: Slovenski jezik
• Ključne besede: hidratacijska toplota, masivni beton, adiabatni poskus, poladiabatni poskus, metoda končnih elementov
• Tipologija: 1.08 - Objavljeni znanstveni prispevek na konferenci
• Organizacija: FGG - Fakulteta za gradbeništvo in geodezijo
• Leto izida: 2011
• Št. strani: Str. 75-82
• PID: 20.500.12556/RUL-32103
• UDK: 624.012
• COBISS.SI-ID: 5533281
• Datum objave v RUL: 10.07.2015

ILC, Anka, TURK, Goran in TRTNIK, Gregor, 2011, Numerično modeliranje poladiabatnega poskusa. V : [na spletu]. Objavljeni znanstveni prispevek na konferenci. 2011. p. 75–82. [Dostopano 17 marec 2025]. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=32103

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Numerical modelling of semi-adiabatic test

Izvleček

The paper deals with the possibility of using a semi-adiabatic test to determine the adiabatic hydration curve of concrete mixtures. Therefore, a temperature was measured at certain points of a concrete specimen during the test and an adiabatic temperature rise was estimated with a numerically determined heat loss compensation. The determined adiabatic hydration curve was inserted into a numerical program, which is used to calculate a temperature field within the concrete element using a finite element method. A comparison between numerically and experimentally determined values indicates the adequacy of the proposed numerical model. Moreover, the semi-adiabatic test proved to be an appropriate method to determine the adiabatic temperature rise.

• Ključne besede: heat of hydration, mass concrete, adiabatic experiment, semi-adiabatic experiment, finite element method