izpis_h1_title_alt

Vpliv zgradbe predelne stene na upogibno trdnost in modul elastičnosti : diplomsko delo (visokošolski strokovni študij)
ID Furlan, Janez (Author), ID Medved, Sergej (Mentor) More about this mentor... This link opens in a new window, ID Resnik, Jože (Reviewer)

.pdfPDF - Presentation file, Download (550,34 KB)
MD5: 7A45362718D28393B580A563C02A8D64
PID: 20.500.12556/rul/f8117315-1c88-4daf-9945-b1daa7fcfe83

Abstract
Ugotavljali smo vpliv različnih predelnih sten na njihovo upogibno trdnost in modul elastičnosti. Različno smo kombinorali: mavčno-kartonske plošče, mavčno-vlaknene plošče, iverno-cementne plošče in iverne plošče z usmerjenim iverjem (OSB plošče). Z raziskavo smo ugotavljali, pri kateri zgradbi dosežemo najboljše vrednosti upogibne trdnosti in modula elastičnosti. Največji vpliv na omenjeni lastnosti imata uporabljen material in zgradba plošče. Stena iz OSB plošč ima najvišjo upogibno trdnost in najmanjši modul elastičnosti. Stene iz mavčnih in cementnih plošč prenesejo večje sile in manjše uklone, v primerjavi s ploščami z dolgimi lesenimi ivermi. Najšibkejša stena je bila iz mavčno-kartonske in mavčno-vlaknene plošče (G=MV plošče). Ugotovili smo, da z naraščanjem prostorninske mase predelne stene med 1,0 do 1,3 g/cm3 naraščata upogibna trdnost in modul elastičnosti.

Language:Slovenian
Keywords:mavčno-kartonske plošče, mavčno-vlaknene plošče, iverno-cementne plošče, iverne plošče z usmerjenim iverjem, upogibna trdnost, modul elastičnosti, debelina, prostorninska masa
Work type:Undergraduate thesis
Typology:2.11 - Undergraduate Thesis
Organization:BF - Biotechnical Faculty
Place of publishing:Ljubljana
Publisher:[J. Furlan]
Year:2005
Number of pages:IX, 34 f., [14 f. pril.]
PID:20.500.12556/RUL-17700 This link opens in a new window
UDC:630*862.4:624.072.1
COBISS.SI-ID:1307017 This link opens in a new window
Publication date in RUL:11.07.2014
Views:1521
Downloads:314
Metadata:XML RDF-CHPDL DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Secondary language

Language:English
Title:Effect of the partition wall composition on bending strength and modulus of elasticity : graduation thesis (higher professional studies)
Abstract:
Partition walls were researched to establish the effect of different composites on their bending strength and modulus of elasticity. Gypsum fibreboards, gypsum cardboards, concrete-fibreboard panels, and oriented strength boards (OSB) were used in different compositions. The goal of research was to acces which construction has the highest bending strength and modulus of elasticity. Both properties are primarily influenced by materials used, and by composition of the board. OSB composition has the highest bending strength and the lowest modulus of elasticity. Gypsum and concrete compositions have less strength and bend less than compositions containing long wooden fibres. Composition consisiting of a card gypsum board and fibre gypsum board (G=MV board) is the weakest. It was found out that the bending strength and modulus of elasticity enlarge by increasing of the density (mass volume) from 1.0 to 1.3g/cm3.

Keywords:gypsum fibreboards, gypsum cardboards, concrete-fibreboard panel, OSB, oriented strand boards, bending strength, modulus of elasticity, moisture content, thickness, density

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back