Strain rate sensitivity of low carbon threaded steel rods of grade 4.6 : by Jovan Trajkovski and Robert Kunc

Trajkovski, Jovan (avtor), Kunc, Robert (avtor)

Bolt connections are widely used in construction and engineering to securely join structural elements. These connections are essential for distributing loads across components and ensuring that structures can withstand external forces. The planned failure of these bolts is of great importance in steel safety barriers (SSBs), as it can directly influence the height of the guardrail and the working width of the SSB during the vehicle impact, which consequently affects the crash consequences. Therefore, it is of great importance to determine the bolt response until fractures under different strain rates. For that purpose, experimental tensile tests of low-strength steel rods of grade 4.6 were conducted at various strain rates (0.0025–25 s−1) until fracture. Test specimens were photographed during the testing, and by means of image processing, input data for calculation of true stresses and strains up to the point of fracture were extracted. Based on the experimental data, material parameters were determined for the Cowper–Symonds model, enabling precise numerical simulations of these connections at various strain rates. A validation study was also performed successfully.

• Jezik: Angleški jezik
• Ključne besede: material characterization, strength parameters, thread failure, numerical simulation, road barriers
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: 14 str.
• Številčenje: Vol. 17, iss. 24, [art. no.] 6228
• PID: 20.500.12556/RUL-166181
• UDK: 620.1:519.6
• ISSN pri članku: 1996-1944
• DOI: 10.3390/ma17246228
• COBISS.SI-ID: 220242179
• Datum objave v RUL: 23.12.2024

Gradivo je del revije

• Naslov: Materials
• Skrajšan naslov: Materials
• Založnik: Molecular Diversity Preservation International
• ISSN: 1996-1944
• COBISS.SI-ID: 33588485

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0109
• Naslov: Modeliranje v tehniki in medicini