Development of a tube-based elastocaloric regenerator loaded in compression : a review

DallʹOlio, Stefano (avtor), Ahčin, Žiga (avtor), Žerovnik, Andrej (avtor), Kabirifar, Parham (avtor), Brojan, Miha (avtor), Tušek, Jaka (avtor)

In recent years, devices based on the elastocaloric effect (eCE) have emerged as one of the most promising alternatives to vaporcompression cooling and heating systems. After a brief overview of elastocaloric materials and elastocaloric devices developed to date, this paper reviews our recent activities in the development of tube-based elastocaloric regenerators loaded in compression. These include the evaluation of novel elastocaloric thermodynamic cycles, the characterization of the elastocaloric and fatigue behavior of Ni–Ti tubes, the thermo-hydraulic evaluation of a tubebased geometry to be applied as an elastocaloric regenerator, the buckling analysis of Ni–Ti tube in compression, and finally the development, numerical modeling, and testing of a tube-based elastocaloric regenerator in both cooling and heat-pumping modes. The developed regenerator shows a durable operation with more than 300,000 cycles, a maximum temperature span of more than 31 K at zero thermal load, and a heating power of more than 60 W at a temperature span of 10 K using only 13.7 g of elastocaloric material. In addition, further improvements of the tube-based elastocaloric regenerators related to a lower thermal mass of the regenerator’s housing are shown and discussed.

• Jezik: Angleški jezik
• Ključne besede: elastocaloric effect, shape memory alloys, buckling, elastocaloric regenerator, fatigue life, cooling, heat pumps
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.02 - Pregledni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: Str. 99-118
• Številčenje: Vol. 10, iss. 2
• PID: 20.500.12556/RUL-161359
• UDK: 621.56:620.178.3
• ISSN pri članku: 2199-384X
• DOI: 10.1007/s40830-024-00483-z
• COBISS.SI-ID: 206932739
• Datum objave v RUL: 10.09.2024

DALLʹOLIO, Stefano, AHČIN, Žiga, ŽEROVNIK, Andrej, KABIRIFAR, Parham, BROJAN, Miha in TUŠEK, Jaka, 2024, Development of a tube-based elastocaloric regenerator loaded in compression : a review. Shape memory and superelasticity [na spletu]. 2024. Vol. 10, no. 2, p. 99–118. [Dostopano 19 maj 2025]. DOI 10.1007/s40830-024-00483-z. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=161359

Gradivo je del revije

• Naslov: Shape memory and superelasticity
• Skrajšan naslov: Shape memory superelast.
• Založnik: Springer Nature, ASM International
• ISSN: 2199-384X
• COBISS.SI-ID: 175460611

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: elastokalorični učinek, zlitine s spominom oblike, upogibanje, elastokalorični regenerator, utrujanje, hlajenje, toplotne črpalke

Projekti

• Financer: EC - European Commission
• Program financ.: H2020
• Številka projekta: 803669
• Naslov: Superelastic Porous Structures for Efficient Elastocaloric Cooling
• Akronim: SUPERCOOL

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0422
• Naslov: Funkcionalne tekočine za napredne energetske sisteme