izpis_h1_title_alt

Študij pojavov na površinah odstranjenih brezcementnih Ti6Al7Nb kolčnih endoprotez
ID Avsec, Klemen (Avtor), ID Dolinar, Drago (Mentor) Več o mentorju... Povezava se odpre v novem oknu, ID Jenko, Monika (Komentor), ID Kocjančič, Boštjan (Komentor)

.pdfPDF - Predstavitvena datoteka, prenos (3,81 MB)
MD5: 3148C25F9E800023C687AF2E18363208

Izvleček
Namen: Namen našega dela je raziskati in primerjati površinsko mikrostrukturo novih in odstranjenih Ti6Al7Nb stegneničnih komponent brezcementnih kolčnih endoprotez, pri katerih je do odpovedi prišlo zaradi različnih vzrokov (aseptično omajanje, okužba, mejno pozitivna latentna okužba). Zanimalo nas je, ali obstajajo razlike v površinski mikrostrukturi stegneničnih komponent med različnimi tipi odpovedi endoprotez. Želeli smo proučiti vpliv sterilizacije odstranjenih stegneničnih komponent na njihovo površinsko mikrostrukturo ter določiti spremembe površinske mikrostrukture stegneničnih komponent v odvisnosti od časa vgradnje v človeško telo. Želeli smo opredeliti stopnjo in vrsto korozije stožca stegnenične komponente Ti6Al7Nb in njen morebiten vpliv na odpoved endoproteze. Metode: V retrospektivni študij smo analizirali dve novi in trideset odstranjenih Ti6Al7Nb stegneničnih komponent, ki smo jih razdelili v tri skupine glede na tip odpovedi endoprotez. Vse komponente so bile pred analizo očiščene, avtoklavirane in shranjene. Merili smo površinske lastnosti (omočljivost, hrapavost in debelino oksidne plasti). Analiza površine je bila opravljena z rentgensko fotoelektronsko spektroskopijo (XPS), vrstično elektronsko mikroskopijo (SEM), energijsko disperzijsko spektroskopijo (EDS) in spektroskopijo Augerjevih elektronov (AES). S fluorescenčno mikroskopijo smo proučili rast (biokompatibilnost, citotoksičnost) mezenhimskih matičnih celic pridobljenih iz kostnega mozga (BMSC) na površini peskanih Ti6Al7Nb stegneničnih komponent. Korozijo stožca smo analizirali z merjenjem hrapavosti, profila in potenciodinamičnimi meritvami. Rezultati: Omočljivost, hrapavost in debelina oksidne plasti so primerljive med novimi in odstranjenimi stegneničnimi komponentami ne glede na vzrok odpovedi endoprotez. Analiza površine in podpovršine odstranjenih endoprotez je pokazala delce zaostalega korunda. Celice na s korundom peskani površini endoproteze rastejo slabše, se slabo pritrjajo na podlago, so porozne in s tem dovzetnejše za okužbo. Nismo opazili povezave med korozijo stožca in tipom odpovedi in časom trajanja do odpovedi endoproteze. Sklepi: Sterilizacija ne vpliva na površinske lastnosti stegneničnih komponent. Površinske lastnosti odstranjenih stegneničnih komponent se ne razlikujejo glede na tip odpovedi odpovedi endoproteze. Korozija stožca ne vpliva na tip in čas odpovedi endoproteze ob uporabi keramičnih glav. Odkrili smo zaostale korundne delce na površini in tudi pod površino stegneničnih komponent odstranjenih brezcementnih Ti6Al7Nb kolčnih endoprotez, kar vpliva na površinske lastnosti komponent. Ostanki korunda vplivajo na celični odziv in posledično vplivajo na osteointegracijo endoprotez v človeško telo.

Jezik:Slovenski jezik
Ključne besede:Ti6Al7Nb zlitina, predčasna odpoved kolčne endoproteze, SEM, XPS, EDS, AES, hrapavost, Al2O3 peskanje, kontaminacija površja in podpovršja, citotoksičnost, osteointegracija, aseptično omajanje, okužba, korozija stožca
Vrsta gradiva:Doktorsko delo/naloga
Organizacija:MF - Medicinska fakulteta
Leto izida:2024
PID:20.500.12556/RUL-158523 Povezava se odpre v novem oknu
Datum objave v RUL:15.06.2024
Število ogledov:34
Število prenosov:4
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Sekundarni jezik

Jezik:Angleški jezik
Naslov:Study of the Surface Phenomena of Retrieved Cementless Ti6Al7Nb Hip Endoprostheses
Izvleček:
Aim: The aim of our research is to study and compare physical and chemical phenomena on the surfaces of new and retrieved Ti6Al7Nb femoral components of cementless hip prostheses. Prostheses failures were due to three main causes: aseptic loosening, infection and latent infection. We wanted to assess whether differences in surface properties exist between prostheses with different failure cause. We wanted to know if the process of sterilization affects the surface properties. We investigated the impact of time since implantation affects the Ti6Al7Nb stem surface. Taper corrosion was also an object of interest, especially whether it affects the cause of premature prostheses failure. Methods: In this retrospective study we analysed different surface properties of two new and thirty retrieved Ti6Al7Nb femoral components by several methods. Firstly, all the samples were cleaned and autoclaved. Wettability and roughness were measured. Scanning electron microscopy (SEM) was used to assess morphology, energy-dispersive X-ray spectroscopy (EDS), Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) were used to analyse surface chemistry, electron back-scattered diffraction (EBSD) for phase analysis, and electrochemical measurements for the corrosion. Fluorescent microscopy was used to assess growth of bone marrow mesenchymal stem cells (BMSC) on grit-blasted Ti6Al7Nb stem surface. Taper corrosion was analysed with roughness and profile measurements as well as with potencio dynamic measurements. Results: Our results showed wettability, roughness and the thickness and composition of oxide layer on the stem surface that were similar between all the investigated new stems and retrieved stems regardless of the cause of stem failure. We found corundum contamination in the surface and sub-surface of all the investigated new and retrieved stems. BMSC growth on grit-blasted Ti6Al7Nb femoral components is restricted, adhesion is limited, cells are porous and therefore more susceptible to infection. There was no relation between taper corrosion and the cause or time to premature stem failure. Conclusion: Sterilization does not affect surface properties. Surface properties of the new and retrieved stems differ only slightly, regardless of the cause of stem failure. Type and time of premature stem failure is not affected by taper corrosion with the use of ceramic heads. We demonstrated that there is presence of retained corundum on stem surfaces and sub-surfaces for all the analysed new and retrieved implants. These particles are believed to cause inflammation in the tissue around the implanted stems which could cause osteolysis and aseptic loosening and failure of the stem.

Ključne besede:Ti6Al7Nb alloy, premature hip endoprostheses failure, SEM, EDS, AES, XPS, roughness, Al2O3 grit blasting, surface and subsurface implant contamination, cytotoxicity, osseointegration, aseptic loosening, infection, Taper corrosion

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj