Machining of hard-to-cut AISI 4462 duplex stainless steel with an environmentally friendly approach with vortex tube

Sönmez, Fikret (avtor)

Machining is a manufacturing process that can be used to produce precision machine parts and has many advantages. The first is the ability to achieve superior surface quality. Tool wear is an inevitable phenomenon that occurs during machining. It is affected by many machining conditions; therefore, this process needs to be monitored and controlled. In this study, tool wear and surface roughness tests were carried out on AISI 4462 duplex stainless-steel materials, known to be a hard-to-cut material. For this purpose, tool wear and surface roughness analyses were implemented by using the environmentally friendly vortex tube cooling system in addition to wet turning conditions for the first time. For both methods, experiments were conducted at a 1 mm depth of cut, 120 m/min cutting speed, and 0.1 mm/rev feed with a 90 mm cutting length for each pass. Both tool wear and surface roughness were examined at the end of each pass. The analysis showed that wet turning gave better results in terms of tool life (19.8 minutes of tool life) compared to 11.1 minutes of tool life in vortex turning. In contrast, the surface roughness values differed up to two times in some experiments, and the vortex tube experiments gave better surface roughness values in all passes. In addition, the vortex tube experiments showed less built-up-edge (BUE) formation than the wet-turning experiments.

• Jezik: Angleški jezik
• Ključne besede: vortex tube, machining, duplex stainless steel, tool life, surface roughness
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2023
• Št. strani: Str. 308-316
• Številčenje: Vol. 69, no. 7/8
• PID: 20.500.12556/RUL-148933
• UDK: 621.91:669.14
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2023.578
• COBISS.SI-ID: 159320835
• Datum objave v RUL: 01.09.2023

SÖNMEZ, Fikret, 2023, Machining of hard-to-cut AISI 4462 duplex stainless steel with an environmentally friendly approach with vortex tube. Strojniški vestnik [na spletu]. 2023. Vol. 69, no. 7/8, p. 308–316. [Dostopano 17 marec 2025]. DOI 10.5545/sv-jme.2023.578. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=148933

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Do okolja prijazen pristop k obdelavi težje odrezovalnega dupleksnega nerjavnega jekla AISI 4462 z vrtinčno cevjo
• Ključne besede: vrtinčna cev, obdelava z odrezavanjem, dupleksno nerjavno jeklo, obstojnost orodja, površinska hrapavost