Avtomatizacija inertizacijske komore

TRAMTE, TADEJ (author), Logar, Vito (mentor)

V diplomski nalogi je predstavljen projekt avtomatizacije inertizacijske komore. Glavni poudarek dela je na opisu programiranja delovanja naprave inertizacijska komora ter opisu funkcionalnosti uporabniškega vmesnika (HMI) za vodenje in nadzor le-te. Omenjeni so tudi ključni koraki v programskem okolju Tia Portal in lastnosti standarda ISA-88.01. Prvi del diplomske naloge opisuje standard ISA-88.01, po katerem sem sprogramiral delovanje inertizacijske komore. Tu so omenjeni osnovni gradniki in lastnosti le-tega. Drugi del opisuje osnovne korake v programskem okolju Tia Portal, kot je kreiranje projekta, funkcionalnost okolja in osnove programiranja PLK-jev. Tretji del opisuje programiranje HMI-jev v programskem okolju Tia Portal. Tu so omenjeni ključni gradniki za izdelavo funkcionalnosti uporabniškega vmesnika (HMI). Četrti del opisuje napravo inertizacijska komora in njeno delovanje. Tu je poudarek predvsem na samem programiranju delovanja naprave in na opisu posameznih funkcionalnosti le-te. Opisani so tudi elementi inertizacijske komore. Peti del opisuje funkcionalnost uporabniškega vmesnika (HMI), ki sem ga izdelal za vodenje in nadzor inertizacijske komore.

• Language: Slovenian
• Keywords: Inertizacijska komora, HMI, ISA-88.01, Tia Portal
• Work type: Bachelor thesis/paper
• Organization: FE - Faculty of Electrical Engineering
• Year: 2023
• PID: 20.500.12556/RUL-144400
• COBISS.SI-ID: 142350851
• Publication date in RUL: 20.02.2023

Secondary language

• Language: English
• Title: Automation of the inertization chamber

Abstract

The thesis presents the project of the inertization chamber automation. The main focus of the work is on the programming of the inertization chamber functionality and the description of the user interface (HMI) functionality for its management and control. Key steps in the Tia Portal software environment and features of the ISA-88.01 standard are also mentioned. The first part of the thesis describes the ISA-88.01 standard, according to which I programmed the functionality of the inertization chamber. The basic building blocks and its features are mentioned here. The second part describes the basic steps in the Tia Portal programming environment, such as creating a project, the functionality of the environment and the basics of PLC programming. The third part describes the programming of HMIs in the Tia Portal programming environment. The key building blocks to complete the functionality of the user interface (HMI) are mentioned here. The fourth part describes the inertization chamber device and its functionality. Here, the emphasis is mainly on the programming of the device’s functionality and on the description of its individual functionalities. The elements of the inertization chamber are also described. The fifth part describes the functionality of the user interface (HMI) that I created for the management and control of the inertization chamber.

• Keywords: Inertization chamber, HMI, ISA-88.01, Tia Portal