Incremental sheet forming of metal-based composites used in aviation and automotive applications

Trzepieciński, Tomasz (avtor), Najm, Sherwan Mohammed (avtor), Pepelnjak, Tomaž (avtor), Bensaid, Kamel (avtor), Szpunar, Marcin (avtor)

For several years, the aviation industry has seen dynamic growth in the use of composite materials due to their low weight and high stiffness. Composites are being considered as a means of building lighter, safer, and more fuel-efficient automobiles. Composite materials are the building material of a relatively new kind of unmanned aerial vehicle, commonly known as a drone. Incremental forming methods allow materials to be quickly formed without the need to manufacture conventional metal dies. Their advantage is the high profitability during the production of prototypes and a small series of products when compared with the conventional methods of plastic forming. This article provides an overview of the incremental forming capabilities of the more commonly produced aluminium- and titanium-based laminates, which are widely used in the aircraft industry. In addition, for composites that are not currently incrementally formed, i.e., aramid-reinforced aluminium laminates, the advantages and potential for incremental forming are presented.

• Jezik: Angleški jezik
• Ključne besede: aluminium alloys, bimetallic sheets, CARALL, composite sheets, GLARE, metal-based composites, sheet forming
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.02 - Pregledni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Datum objave: 01.10.2022
• Leto izida: 2022
• Št. strani: 19 str.
• Številčenje: Vol. 6, iss. 10, art. 295
• PID: 20.500.12556/RUL-141945
• UDK: 621.7
• ISSN pri članku: 2504-477X
• DOI: 10.3390/jcs6100295
• COBISS.SI-ID: 125236995
• Datum objave v RUL: 12.10.2022

Gradivo je del revije

• Naslov: Journal of composites science
• Skrajšan naslov: J. compos. sci.
• Založnik: MDPI
• ISSN: 2504-477X
• COBISS.SI-ID: 529755673

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: aluminijeve zlitine, bimetalne plošče, CARALL, kompozitne plošče, GLARE, kompoziti na osnovi kovin, preoblikovanje plošč

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0248
• Naslov: Inovativni izdelovalni sistemi in procesi