izpis_h1_title_alt

Modelling the impacts of reservoir operation on river floods: a case study of Cauvery basin in India : master's thesis
ID Yeditha, Pavan Kumar (Avtor), ID Giri, Sanjay (Mentor) Več o mentorju... Povezava se odpre v novem oknu, ID Bhattacharya, Biswa (Mentor) Več o mentorju... Povezava se odpre v novem oknu, ID Mikoš, Matjaž (Komentor)

.pdfPDF - Predstavitvena datoteka, prenos (5,60 MB)
MD5: 671E2899354A6FB4A7AB8796711C654D

Izvleček
Floods are one of the most devastating natural disasters, affecting millions of people around the world. Extreme events have increased considerably due to climate change, which has increased the occurrence of floods in many major river basins around the world. India is a country with multiple monsoon-based rivers and extreme weather events. The occurrence of large-scale floods has increased noticeably. The socioeconomic impact of these floods is immense since they occur in such short periods. The Cauvery River basin is one of the key river basins identified as prone to flooding each year. There are numerous dams and barrages in the basin. The prevalence of floods in this basin is attributed to the basin's severe short-term and flashy rainfall pattern, according to reports and news stories. Furthermore, considering their primary aim of agriculture and drinking water supply, the dams do not appear to consider flood management. To better understand the occurrence of floods and the impact of dams on floods in the basin, comprehensive research was conducted utilizing process-based numerical modelling methods in conjunction with data analysis, emphasising the 2018 flood event. Following the knowledge of the processes in the basin connected to the occurrence of floods and dam operation, one-dimensional (1D) process-based hydrodynamic models (Delft3D-FM) paired with a Real-Time Control (RTC) tool for dam operation were built for the main Cauvery river, including some major branches including Kabini and Bhavani. Based on observable data, the model was initially calibrated and validated. It was then used to simulate the real-world system and understand the propagation of the 2018 flood. According to the results study, the dams in the basin did not produce any additional floods to the river other than passing through the arriving flood peaks. However, the dams may be utilised to mitigate the consequences of the flood. As a result, several dam operation scenarios were explored to determine whether the existing dams are suitable for flood management. To that end, a series of model simulation scenarios were created and tested to determine whether dams can be utilized to collect flood peaks and under what conditions they can be used for flood management. Based on an understanding of the flooded areas, the Mettur reservoir in the main Cauvery river was used for scenario simulations to assess the effects of the reservoir operation. Based on the reservoir analysis, it was found that the reservoir is not capable of capturing floods with its current specifications. To capture the impending flood peaks, two main scenarios were simulated: lowering the spillway crest level (i.e. increasing flow capacity) and raising the dam height (i.e. increasing reservoir storage). The findings of the simulation and analysis demonstrated that the reservoirs could capture the flood peaks in both scenarios. Even though these scenarios appear to help improve the flood management functions of the Mettur reservoir, other technical, economic, social, and environmental factors must be addressed when picking solutions for the real-world situation. This study successfully replicates and reveals some essential features linked to the consequences of dams on flood propagation in the Cauvery river, as well as the importance of reservoir storage and spillage capacity in conjunction with an efficient reservoir operation strategy.

Jezik:Angleški jezik
Ključne besede:civil engineering, master thesis, floods, Cauvery river basin, real-time control, RTC, flood control, reservoir analysis
Vrsta gradiva:Magistrsko delo/naloga
Tipologija:2.09 - Magistrsko delo
Organizacija:FGG - Fakulteta za gradbeništvo in geodezijo
Kraj izida:Ljubljana
Založnik:[P. K. Yeditha]
Leto izida:2022
Št. strani:XI, 71 str.
PID:20.500.12556/RUL-141736 Povezava se odpre v novem oknu
UDK:504.61:556.166(540)(043.3)
COBISS.SI-ID:124438531 Povezava se odpre v novem oknu
Datum objave v RUL:06.10.2022
Število ogledov:762
Število prenosov:101
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Modeliranje vplivov delovanja akumulacije na rečne poplave: študija primera bazena Cauvery v Indiji : magistrsko delo
Izvleček:
Poplave so ena najbolj uničujočih naravnih nesreč, ki prizadene milijone ljudi po vsem svetu. Ekstremni dogodki so se znatno povečali zaradi podnebnih sprememb, ki so povečale pojav poplav v mnogih večjih porečjih po svetu. Indija je država z več monsunskimi rekami in ekstremnimi vremenskimi pojavi. Pojav večjih poplav se je opazno povečal. Družbeno-ekonomski vpliv teh poplav je ogromen, saj se zgodijo v tako kratkih obdobjih. Povodje reke Cauvery je eno od ključnih porečij, ki so vsako leto izpostavljena poplavam. V porečju so številni jezovi in jezovi. Glede na poročila in novice se razširjenost poplav v tem porečju pripisuje močnemu kratkotrajnemu in bliskovitemu vzorcu padavin. Poleg tega se zdi, da glede na njihov glavni cilj kmetijstva in oskrbe s pitno vodo jezovi ne upoštevajo obvladovanja poplav. Za boljše razumevanje pojavljanja poplav in vpliva jezov na poplave v porečju je bila izvedena obsežna raziskava z uporabo procesnih metod numeričnega modeliranja v povezavi z analizo podatkov, s poudarkom na poplavnem dogodku leta 2018. Po poznavanju procesov v bazenu, povezanih s pojavom poplav in delovanjem jezov, so bili izdelani enodimenzionalni (1D) procesni hidrodinamični modeli (Delft3D-FM) v povezavi z orodjem za nadzor v realnem času (RTC) za delovanje jezov. zgrajena za glavno reko Cauvery, vključno z nekaterimi večjimi vejami, vključno s Kabinijem in Bhavanijem. Na podlagi opazovanih podatkov je bil model prvotno umerjen in validiran. Nato je bil uporabljen za simulacijo resničnega sistema in razumevanje širjenja poplave leta 2018. Glede na študijo rezultatov jezovi v porečju niso povzročili nobenih dodatnih poplav v reki, razen prehoda skozi prihajajoče poplavne vrhove. Jezovi pa se lahko uporabijo za ublažitev posledic poplave. Posledično je bilo raziskanih več scenarijev obratovanja jezov, da bi ugotovili, ali so obstoječi jezovi primerni za obvladovanje poplav. V ta namen je bila ustvarjena in preizkušena vrsta modelnih simulacijskih scenarijev, da bi ugotovili, ali je jezove mogoče uporabiti za zbiranje poplavnih konic in pod kakšnimi pogoji jih je mogoče uporabiti za obvladovanje poplav. Na podlagi razumevanja poplavljenih območij je bil rezervoar Mettur v glavni reki Cauvery uporabljen za simulacije scenarijev za oceno učinkov delovanja rezervoarja. Na podlagi analize zadrževalnika je bilo ugotovljeno, da zadrževalnik s trenutnimi specifikacijami ni sposoben zajemati poplav. Za zajem bližajočih se konic poplav sta bila simulirana dva glavna scenarija: znižanje vrha preliva (tj. povečanje zmogljivosti pretoka) in dvig višine jezu (tj. povečanje zadrževanja rezervoarja). Ugotovitve simulacije in analize so pokazale, da lahko akumulacije zajamejo konice poplav v obeh scenarijih. Čeprav se zdi, da ti scenariji pomagajo izboljšati funkcije obvladovanja poplav zadrževalnika Mettur, je treba pri izbiri rešitev za dejansko stanje upoštevati druge tehnične, ekonomske, socialne in okoljske dejavnike. Ta študija uspešno posnema in razkriva nekatere bistvene značilnosti, povezane s posledicami jezov na širjenje poplav v reki Cauvery, kot tudi pomen skladiščenja rezervoarja in zmogljivosti razlitja v povezavi z učinkovito strategijo delovanja rezervoarja.

Ključne besede:gradbeništvo, magistrska dela, VOI, poplave, porečje reke Cauvery, nadzor v realnem času, RTC, nadzor poplav, analiza rezervoarja

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj