izpis_h1_title_alt

Influence of load mass, drum speed and load composition on evenness of drying in a heat pump tumble dryer
ID Gatarić, Pero (Author), ID Širok, Brane (Author), ID Hočevar, Marko (Author), ID Novak, Lovrenc (Author)

.pdfPDF - Presentation file, Download (2,42 MB)
MD5: AB407558F694A1872D710DFF281026F2
URLURL - Source URL, Visit https://www.tandfonline.com/doi/full/10.1080/07373937.2021.1928688 This link opens in a new window

Abstract
This work investigates the evenness of fabric drying in a household heat pump tumble dryer. The evenness of drying was defined as the standard deviation of the fraction of water, evaporated from each fabric item. Drying experiments were performed according to the IEC 61121 standard, which was also followed to determine quantities and types of cotton fabric items (towels, pillowcases and sheets) within each load. Regression analysis was performed to develop models for evenness of drying as a function of load mass and drum speed. Similarities between the tumble dryer energy efficiency parameters and the evenness of drying were analyzed. A high level of agreement was determined between responses of energy efficiency, drying time and evenness of drying to changes in drum speed. Effects of load mass were however more complex and were reflected in a non-linear response of evenness of drying to changes in load mass – the best evenness of drying could be obtained at 2 kg load, followed by 6 kg and 4 kg load. Load composition was determined as an important factor affecting the evenness of drying. At larger loads, a sheet or a pillowcase in average contributed more to the un-evenness of drying than a towel. The presence of sheets and probably the ratio of sheets to other item types in the load were determined as the most probable factors that negatively affected the evenness of drying.

Language:English
Keywords:heat pump tumble dryers, evenness of drying, regression analysis, energy efficiency
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FS - Faculty of Mechanical Engineering
Publication status:Published
Publication version:Version of Record
Year:2022
Number of pages:Str. 2175–2187
Numbering:Vol. 40, iss. 10
PID:20.500.12556/RUL-141026 This link opens in a new window
UDC:621.577:648.336
ISSN on article:0737-3937
DOI:10.1080/07373937.2021.1928688 This link opens in a new window
COBISS.SI-ID:65575939 This link opens in a new window
Publication date in RUL:22.09.2022
Views:385
Downloads:65
Metadata:XML RDF-CHPDL DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Drying technology
Shortened title:Dry. technol.
Publisher:Taylor & Francis
ISSN:0737-3937
COBISS.SI-ID:5922823 This link opens in a new window

Licences

License:CC BY-NC-ND 4.0, Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Link:http://creativecommons.org/licenses/by-nc-nd/4.0/
Description:The most restrictive Creative Commons license. This only allows people to download and share the work for no commercial gain and for no other purposes.

Secondary language

Language:Slovenian
Keywords:sušilniki perila s toplotno črpalko, enakomernost sušenja, regresijska analiza, energijska učinkovitost

Projects

Funder:ARRS - Slovenian Research Agency
Project number:P2-0401
Name:Energetsko strojništvo

Funder:Other - Other funder or multiple funders
Funding programme:Republic of Slovenia, SPS
Project number:OP20.00376
Acronym:IQDOM

Funder:EC - European Commission
Funding programme:European Regional Development Fund, SPS
Acronym:IQDOM

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back