Topološka optimizacija gonilke kolesa

Skalar, Tomaž (avtor), Jerman, Boris (mentor)

V magistrskem delu je predstavljeno optimalno snovanje gonilke kolesa, ki je eden od njegovih ključnih in najbolj obremenjenih delov. Zaradi tega je njeno snovanje v kombinaciji z željo po čim manjši končni masi zanimiv in aktualen izziv. V prvem delu je prikazan pregled literature s poudarkom na raziskavah s področja topološke optimizacije. Prikazani so tudi grafi sil, ki delujejo na gonilko v odvisnosti od kota zasuka gonilke ter zahteve standardov, ki jih morajo gonilke izpolnjevati. Na podlagi pridobljenih podatkov so bile določene sile, ki so bile v nadaljevanju uporabljene pri izvedbi simulacij in topološke optimizacije. Oblika in dimenzije začetnega optimizacijskega volumna so bili določeni na osnovi mer obstoječih gonilk. Narejene so bile začetne trdnostne analize, na osnovi katerih je bila v nadaljevanju izvedena topološka optimizacija. Iz oblike, pridobljene s topološko optimizacijo, je bil izdelan nov 3D model, ki upošteva tudi osnovne tehnološke in estetske zahteve. Zanj je bila izvedena kontrola napetostno-deformacijskih stanj z obremenitvenimi primeri, podanimi v standardu, ter primerjava z na tržišču obstoječo visokokakovostno gonilko.

• Jezik: Slovenski jezik
• Ključne besede: kolo, gonilka kolesa, metoda končnih elementov, napetostno-deformacijska stanja, topološka optimizacija, optimalna rešitev
• Vrsta gradiva: Magistrsko delo/naloga
• Tipologija: 2.09 - Magistrsko delo
• Organizacija: FS - Fakulteta za strojništvo
• Kraj izida: Ljubljana
• Založnik: [T. Skalar]
• Leto izida: 2022
• Št. strani: str. [56]
• PID: 20.500.12556/RUL-139620
• UDK: 624.07:796.61(043.2)
• COBISS.SI-ID: 123968259
• Datum objave v RUL: 06.09.2022

SKALAR, Tomaž, 2022, Topološka optimizacija gonilke kolesa [na spletu]. Magistrsko delo. Ljubljana : T. Skalar. [Dostopano 31 marec 2025]. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=139620

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Topology optimization of a bicycle crank arm

Izvleček

The master's thesis presents the optimal design of the bicycle crank, which is one of its key and most stressed parts. For this reason, its design, in combination with the desire for the smallest possible final mass, is an interesting and relevant challenge. The first part presents a review of the literature with an emphasis on research in the field of topological optimization. Graphs of the forces acting on the crank depending on the angle of rotation of the crank and the requirements of the standards that the cranks must meet are also shown. On the basis of the obtained data, the forces were determined, which were subsequently used in the execution of simulations and topological optimizations. The shape and dimensions of the initial optimization volume were determined based on the dimensions of the existing cranks. Initial strength analyses were made, on the basis of which topological optimization was subsequently carried out. A new 3D model was created from the shape obtained by topological optimization, which also takes into account the basic technological and aesthetic requirements. It was tested for stress-strain states with the load cases specified in the standard, and compared with high-quality cranks available on the market.

• Ključne besede: bicycle, crank arm, finite element method, stress-strain states, topology optimization, optimal solution