Soft sensor of bath temperature in an electric arc furnace based on a data-driven Takagi–Sugeno fuzzy model

Blažič, Aljaž (avtor), Škrjanc, Igor (avtor), Logar, Vito (avtor)

Electric arc furnaces (EAFs) are intended for the recycling of steel scrap. One of the more important variables in the recycling process is the tapping temperature of the steel. Due to the nature of the process, continuous measurement of the melt temperature is complicated and requires sophisticated measuring equipment; therefore, for most EAFs, separate temperature samples are taken several times before the melt is tapped, to verify whether the melt temperature is within the prescribed range. The measurements are obtained using disposable probes; when measurement is performed, the furnace must be switched off, leading to increased tap-to-tap time, unnecessary energy losses, and consequently, lower efficiency. The following paper presents a novel approach to EAF bath temperature estimation using a fuzzy model soft sensor obtained using Gustafson–Kessel input data clustering and particle swarm optimization of model parameters. The model uses the first temperature measurement as an initial condition, and measurements of the necessary EAF inputs to estimate continuously the bath temperature throughout the refining stage of the recycling process. The results have shown that the prediction accuracy of the proposed model is very high and that it fulfils the required tolerance band. The model is intended for parallel implementation in the EAF process, with the aim of achieving fewer temperature measurements, shorter tap-to-tap times, and decreased energy losses. Furthermore, if information about bath temperature is accessible in a continuous manner, operators can adjust the control of the EAF to achieve optimal tapping temperature and thus higher EAF efficiency.

• Jezik: Angleški jezik
• Ključne besede: electric arc furnace, fuzzy modeling, Gustafson–Kessel clustering, particle swarn optimization, temperature estimation
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FE - Fakulteta za elektrotehniko
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: 11 str.
• Številčenje: Vol. 113, pt. B, art. 107949
• PID: 20.500.12556/RUL-138854
• UDK: 681.5:621.365.2
• ISSN pri članku: 1568-4946
• DOI: 10.1016/j.asoc.2021.107949
• COBISS.SI-ID: 79852547
• Datum objave v RUL: 23.08.2022

BLAŽIČ, Aljaž, ŠKRJANC, Igor in LOGAR, Vito, 2021, Soft sensor of bath temperature in an electric arc furnace based on a data-driven Takagi–Sugeno fuzzy model. Applied soft computing [na spletu]. 2021. Vol. 113, no. pt. B,  107949. [Dostopano 28 marec 2025]. DOI 10.1016/j.asoc.2021.107949. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=138854

Gradivo je del revije

• Naslov: Applied soft computing
• Založnik: Elsevier
• ISSN: 1568-4946
• COBISS.SI-ID: 16080679

Licence

• Licenca: CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
• Opis: Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: elektroobločna peč, mehko modeliranje, rojenje Gustafson-Kessel, optimizacija z roji delcev, ocena temperature

Projekti

• Financer: EC - European Commission
• Program financ.: H2020
• Številka projekta: 869815
• Naslov: Optimization and performance improving in metal industry by digital technologies
• Akronim: INEVITABLE

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0219
• Naslov: Modeliranje, simulacija in vodenje procesov