izpis_h1_title_alt

Multi-response optimization of the tribological behaviour of PTFE-based composites via Taguchi grey relational analysis
ID Ibrahim, Musa Alhaji (Avtor), ID Çamur, Hüseyin (Avtor), ID Savaş, Mahmut A. (Avtor), ID Sabo, Alhassan Kawu (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1018,56 KB)
MD5: 2498BA79F32FE28687C1F9C360A87A2E
URLURL - Izvorni URL, za dostop obiščite https://www.sv-jme.eu/sl/article/multi-response-optimization-of-tribological-behaviours-of-ptfe-based-composites-via-taguchi-grey-relational-analysis-at-light-conditions/ Povezava se odpre v novem oknu

Izvleček
Polymer-based composites find applications in several areas because of their exceptional properties. This article deals with Taguchi grey relational optimization method of abrasive parameters (load (L), grit size (G) and sliding distance (D)) and their influence on abrasive performance of reinforced polytetrafluoroethylene (PTFE) composites. A Taguchi L9 orthogonal array was designed, and nine experimental tests were conducted based on the Taguchi designed experiments. A pin-on-disc tribology machine was used for the experiments. The coefficient of friction (µ) and abrasive specific wear rate (Aw) were recorded for each experiment. An analysis of variance (ANOVA) was performed to establish the significance and percentage contribution of each parameter affecting the abrasive wear performance. Results from the Taguchi-grey-relational method showed that the optimal combination of parameters was achieved at load of 10 N, grit size of 1000 mesh, and sliding distance of 350 m (coded as L3G1D3). ANOVA findings revealed that a grit size with 67.69 % as the most influential on the abrasive performance of polymer-based composites. Validation tests performed using the optimal combination parameter showed an enhancement of 55.22 % in grey relational grade.

Jezik:Angleški jezik
Ključne besede:PTFE, carbon fibres, bronze fibres, abrasives, Taguchi, grey relational analysis
Vrsta gradiva:Članek v reviji (dk_c)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2022
Status objave pri reviji:Objavljeno
Verzija članka:Založnikova različica članka
Datum objave:01.01.2022
Št. strani:Str. 359-367
Številčenje:Vol. 68, no. 5
PID:20.500.12556/RUL-137287 Povezava se odpre v novem oknu
UDK:678.061
ISSN pri članku:0039-2480
DOI:10.5545/sv-jme.2021.7466 Povezava se odpre v novem oknu
COBISS.SI-ID:111042819 Povezava se odpre v novem oknu
Datum objave v RUL:09.06.2022
Število ogledov:108
Število prenosov:18
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.]
ISSN:0039-2480
COBISS.SI-ID:762116 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:28.03.2022

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Večciljna optimizacija tribološkega vedenja kompozitov na osnovi PTFE pri manjših obremenitvah s sivo relacijsko analizo po Taguchiju
Ključne besede:PTFE, ogljikova vlakna, bronasta vlakna, abrazivi, Taguchi, siva relacijska analiza

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj