Podrobno

Analysis of equivalent inductance of three-phase induction motors in the switching frequency range
ID Srndovic, Milan (Avtor), ID Fišer, Rastko (Avtor), ID Grandi, Gabriele (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (3,39 MB)
MD5: 42B7FDB7A0EA84DAECB0736CC249F682
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2079-9292/8/2/120 Povezava se odpre v novem oknu

Izvleček
The equivalent inductance of three-phase induction motors is experimentally investigated in this paper, with particular reference to the frequency range from 1 kHz to 20 kHz, typical for the switching frequency in inverter-fed electrical drives. The equivalent inductance is a basic parameter when determining the inverter-motor current distortion introduced by switching modulation, such as rms of current ripple, peak-to-peak current ripple amplitude, total harmonic distortion (THD), and synthesis of the optimal PWM strategy to minimize the THD itself. In case of squirrel-cage rotors, the experimental evidence shows that the equivalent inductance cannot be considered constant in the frequency range up to 20 kHz, and it considerably differs from the value measured at 50 Hz. This frequency-dependent behaviour can be justified mainly by the skin effect in rotor bars affecting the rotor leakage inductance in the considered frequency range. Experimental results are presented for a set of squirrel-cage induction motors with different rated power and one wound-rotor motor in order to emphasize the aforesaid phenomenon. The measurements were carried out by a three-phase sinusoidal generator with the maximum operating frequency of 5 kHz and a voltage source inverter operating in the six-step mode with the frequency up to 20 kHz.

Jezik:Angleški jezik
Ključne besede:equivalent inductance, leakage inductance, switching frequency, induction motor, current ripple, current switching ripple, switching frequency modelling
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FE - Fakulteta za elektrotehniko
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2019
Št. strani:10 str.
Številčenje:Vol. 8, iss. 2, art. 120
PID:20.500.12556/RUL-131957 Povezava se odpre v novem oknu
UDK:621.31
ISSN pri članku:2079-9292
DOI:10.3390/electronics8020120 Povezava se odpre v novem oknu
COBISS.SI-ID:12339540 Povezava se odpre v novem oknu
Datum objave v RUL:07.10.2021
Število ogledov:1310
Število prenosov:168
Metapodatki:XML DC-XML DC-RDF
:
SRNDOVIC, Milan, FIŠER, Rastko in GRANDI, Gabriele, 2019, Analysis of equivalent inductance of three-phase induction motors in the switching frequency range. Electronics [na spletu]. 2019. Vol. 8, no. 2,  120. [Dostopano 25 marec 2025]. DOI 10.3390/electronics8020120. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=131957
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Electronics
Skrajšan naslov:Electronics
Založnik:MDPI
ISSN:2079-9292
COBISS.SI-ID:523068953 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:01.02.2019

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:ekvivalentna induktivnost, razsipana induktivnost, stikalna frekvenca, asinhronski motor, valovitost toka

Podobna dela

Podobna dela v RUL:
  1. Experimental evaluation of IR heating panels' performance in terms of thermal comfort
  2. Ergonomic office workspace design
  3. Planning a time schedule for renovation of an administrative building
  4. Holistic energy rehabilitation of the Veno Pilon Ajdovščina Secondary School building
  5. Renovation proposal of a hospital building on Vrazov trg in terms of indoor environmental quality and efficient energy use
Podobna dela v drugih slovenskih zbirkah:
  1. Timber-glass Panels for Rennovation
  2. Timber-glass facade panel as element of contemporary architecture
  3. LOW ENERGY HOUSE DESIGN
  4. Izraba mineralnih gradbenih odpadkov v Sloveniji
  5. Symmetry breaking: application in optimization of energy process and detection of nanoparticles

Nazaj