We live in a world of technology and it is obvious that over the years technology has
become an integral part of our lives. The world needs less and less human labor day by day
and many processes and systems are based on the optional presence or labor of a human
being. One such system is the smart home system which will be introduced and discussed in
this thesis. The aim of the thesis is to explain the example of the smart home system in the
best possible way with all the necessary components and the corresponding configuration. In
this way, we will create a manual that will guide the realization of the system step by step,
from the beginning to the end.
The thesis consists of four parts, divided into smaller steps that will guide us through
the whole project. In the first part, we present the idea of a smart home, i.e. the project
scheme, on the basis of which the system will also be developed and realized. In the first part
we also mention the software that we will use to configure and program the devices used by
the system. This is followed by the drawing of an electrical plan in the EPLAN software
environment. After drawing the electrical plan, we will come to the third part where we will
deal with the programming of the PLC (Programmable Logic Controller). In the last, fourth
part, we will follow the configuration of the HMI (Human-Machine Interface), where we will
also create a design for the user interface screen.
Smart home after final configuration of all devices will be a basic automated process
that will allow users easier interaction and control in configuring home appliances like air
conditioner, heater, garage doors etc. We will go through all the steps that led us to the
automated home processes in the thesis.
|
