A NiTi alloy weft knitted fabric for smart firefighting clothing

Šalej Lah, Alenka (avtor), Fajfar, Peter (avtor), Kugler, Goran (avtor), Rijavec, Tatjana (avtor)

A prototype of a new shape-memory nitinol knitted fabric intended for use as an active thermal insulating interlining in firefighting protective clothing was developed in the study presented in this paper. Weft knitted fabrics were made from commercially available cold-worked nickel titanium alloy monofils. Knits were made on a manual knitting machine from a monofil measuring 0.1 mm in diameter, while a hand-made knit was prepared from a monofil measuring 0.2 mm in diameter. Nitinol fabrics were annealed at 500 °C to achieve an austenite transition temperature of 75 °C. A special constructed mould made of a steel frame and aluminium domes measuring 30 and 20 mm in height was used to give the nitinol fabrics a new temporary shape. A two-way, shape-memory effect of the nitinol fabrics was achieved using a 15-cycle training process. The achieved shape-memory effect was tested in a heated chamber at 100 °C, where bulges measuring 12–25 mm in height occurred. NiTi knits made from finer monofil were the most successful shape-memory knits. They were machine knitted and achieved sufficiently high bulges, measuring 18 or 12 mm, that facilitated large enough air gaps for effective thermal protection. A smart textile system was prepared by inserting the trained nitinol fabric into a pocket made from two textile fabric layers sewn together. When it was exposed to environmental temperatures of 75 °C and higher, it instantly changed its form from a two-dimensional shape to a three-dimensional shape, while increasing the air gap in the pocket. A quilted fabric made from such a smart textile system could be used in firefighting protective clothing to locally improve thermal insulation and protect the human skin from overheating or burns.

• Jezik: Angleški jezik
• Ključne besede: interlining, personal protective garment, smart textile, shape-memory alloys (SMAs)
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: NTF - Naravoslovnotehniška fakulteta
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2019
• Št. strani: 10 str.
• Številčenje: Vol. 28, no. 6, art. 065014
• PID: 20.500.12556/RUL-128671
• UDK: 669
• ISSN pri članku: 0964-1726
• DOI: 10.1088/1361-665X/ab18b9
• COBISS.SI-ID: 1805151
• Datum objave v RUL: 22.07.2021

ŠALEJ LAH, Alenka, FAJFAR, Peter, KUGLER, Goran in RIJAVEC, Tatjana, 2019, A NiTi alloy weft knitted fabric for smart firefighting clothing. Smart materials and structures [na spletu]. 2019. Vol. 28, no. 6,  065014. [Dostopano 23 marec 2025]. DOI 10.1088/1361-665X/ab18b9. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=128671

Gradivo je del revije

• Naslov: Smart materials and structures
• Skrajšan naslov: Smart mater. struc.
• Založnik: IOP Publishing
• ISSN: 0964-1726
• COBISS.SI-ID: 13497861

Licence

• Licenca: CC BY 3.0, Creative Commons Priznanje avtorstva 3.0 Nedoločena
• Povezava: https://creativecommons.org/licenses/by/3.0/deed.sl
• Opis: Dovoljuje kopiranje in razširjanje vsebin v kakršnemkoli mediju in obliki. Dovoljuje remixanje, urejanje, predelava in vključevanje vsebine v lastna dela v vse namene, tudi komercialne. Primerno morate navesti avtorja, povezavo do licence in označiti spremembe, če so kakšne nastale. To lahko storite na kakršenkoli razumen način, vendar ne na način, ki bi namigoval na to, da dajalec licence podpira vas ali vašo uporabo dela. Ne smete uporabiti pravnih določil ali tehničnih ukrepov, ki bi pravno omejili ali onemogočilo druge, da bi storili karkoli, kar licenca dovoli.
• Začetek licenciranja: 01.06.2019

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Program financ.: Grant for the doctoral student