Podrobno

A regenerative elastocaloric heat pump
ID Tušek, Jaka (Avtor), ID Engelbrecht, Kurt (Avtor), ID Eriksen, Dan (Avtor), ID DallʹOlio, Stefano (Avtor), ID Tušek, Janez (Avtor), ID Pryds, Nini (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (931,68 KB)
MD5: 08631684864536E13B6E75254DD11CB6
URLURL - Izvorni URL, za dostop obiščite http://www.nature.com/articles/nenergy2016134 Povezava se odpre v novem oknu

Izvleček
A large fraction of global energy use is for refrigeration and air-conditioning, which could be decarbonized if efficient renewable energy technologies could be found. Vapour-compression technology remains the most widely used system to move heat up the temperature scale after more than 100 years; however, caloric-based technologies (those using the magnetocaloric, electrocaloric, barocaloric or elastocaloric effect) have recently shown a significant potential as alternatives to replace this technology due to high efficiency and the use of green solid-state refrigerants. Here, we report a regenerative elastocaloric heat pump that exhibits a temperature span of 15.3 K on the water side with a corresponding specific heating power up to 800W1/kg and maximum COP (coefficient-of-performance) values of up to 7. The efficiency and specific heating power of this device exceeds those of other devices based on caloric effects. These results open up the possibility of using the elastocaloric effect in various cooling and heat-pumping applications.

Jezik:Angleški jezik
Ključne besede:elastocaloric effect, regenerative thermodynamic cycle, heat pumps
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Recenzirani rokopis
Leto izida:2016
Št. strani:Str. 1-6
Številčenje:Vol. 1, iss. 10, art. 16134
PID:20.500.12556/RUL-127890 Povezava se odpre v novem oknu
UDK:697:621.577(045)
ISSN pri članku:2058-7546
DOI:10.1038/nenergy.2016.134 Povezava se odpre v novem oknu
COBISS.SI-ID:14935067 Povezava se odpre v novem oknu
Datum objave v RUL:28.06.2021
Število ogledov:3651
Število prenosov:1049
Metapodatki:XML DC-XML DC-RDF
:
TUŠEK, Jaka, ENGELBRECHT, Kurt, ERIKSEN, Dan, DALLʹOLIO, Stefano, TUŠEK, Janez in PRYDS, Nini, 2016, A regenerative elastocaloric heat pump. Nature energy [na spletu]. 2016. Vol. 1, no. 10,  16134, p. 1–6. [Dostopano 27 marec 2025]. DOI 10.1038/nenergy.2016.134. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=127890
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Nature energy
Skrajšan naslov:Nat. energy
Založnik:Nature Publishing Group
ISSN:2058-7546
COBISS.SI-ID:14934811 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:elastokalorični učinek, regenerativni termodinamični krožni proces, toplotne črpalke

Projekti

Financer:Drugi - Drug financer ali več financerjev
Program financ.:DTU’s international H.C. Ørsted postdoctoral programm
Naslov:Design and testing of an efficient elastocaloric refrigerator for room-temperature applications

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:Z2-7219
Naslov:Od elastokaloričnega efekta do učinkovite hladilne naprave

Podobna dela

Podobna dela v RUL:
  1. From the elastocaloric effect towards an efficient thermodynamic cycle
  2. Modeling large deformations of thin-walled SMA structures by shell finite elements
  3. Thin-walled Ni-Ti tubes under compression
  4. Elastocaloric effect vs fatigue life
  5. Hranilnik toplote na osnovi materiala s trdninsko fazno transformacijo
Podobna dela v drugih slovenskih zbirkah:
  1. Microstructure and properties of shape memory alloys
  2. Vpliv modifikatorjev CuTi30 in CaB6 na strukturo in lastnosti CuZnAl zlitine z oblikovnim spominom
  3. Microstructure of rapidly solidified Cu-Al-Ni shape memory alloy ribbons
  4. The shape memory effect in systems Cu-based alloys
  5. Vpliv Ce3+ ionov na korozijske lastnosti zlitine Cu-Al-Ni v 3,5% raztopini NaCl

Nazaj