Podrobno

Recent advances in the research of the seismic response of RC precast buildings at the University of Ljubljana
ID Zoubek, Blaž (Avtor), ID Babič, Anže (Avtor), ID Dolšek, Matjaž (Avtor), ID Fischinger, Matej (Avtor), ID Isaković, Tatjana (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (2,78 MB)
MD5: 41A62483C630F8E47310BCD976DFBA54

Izvleček
Although in Europe, precast concrete buildings had been built for decades, their seismic response was poorly understood, which is reflected in ambiguous code requirements and conservative design approaches. Therefore, this structural system was the main focus of several European research projects in the past 2 decades. The University of Ljubljana was actively involved in these projects. The key results of the work performed at the University of Ljubljana are presented and discussed in this paper. The main contributions include: a) the development of a new capacity model of beam-column dowel connections, which are one of the critical parts of the RC precast structural system, b) new insight into the cyclic behaviour of fastening systems of concrete cladding panels, and new design procedures for the estimation of strength and displacement capacity of cladding fasteners, c) the development of a methodology for seismic fragility analysis of RC precast buildings, and the fragility curves of precast RC building classes, which can be used for the safety-calibration of the new design procedures of RC precast buildings, and d) the development of a relatively simple and economically attractive back-up (strengthening) system to prevent the falling of panels in case of a strong earthquake.

Jezik:Angleški jezik
Ključne besede:civil engineering, engineering structures, earthquake engineering
Vrsta gradiva:Znanstveno delo
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FGG - Fakulteta za gradbeništvo in geodezijo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2021
Št. strani:Str. 1-17
Številčenje:letn. , Št. 7
PID:20.500.12556/RUL-127158 Povezava se odpre v novem oknu
UDK:624.042.7
ISSN pri članku:2297-3362
DOI:10.3389/fbuil.2021.630952 Povezava se odpre v novem oknu
COBISS.SI-ID:59248899 Povezava se odpre v novem oknu
Datum objave v RUL:20.05.2021
Število ogledov:1460
Število prenosov:242
Metapodatki:XML DC-XML DC-RDF
:
ZOUBEK, Blaž, BABIČ, Anže, DOLŠEK, Matjaž, FISCHINGER, Matej in ISAKOVIĆ, Tatjana, 2021, Recent advances in the research of the seismic response of RC precast buildings at the University of Ljubljana. Frontiers in built environment [na spletu]. 2021. No. Št. 7, p. 1–17. [Dostopano 4 april 2025]. DOI 10.3389/fbuil.2021.630952. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=127158
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Frontiers in built environment
Skrajšan naslov:Front. built environ.
Založnik:Frontiers Media S.A..
ISSN:2297-3362
COBISS.SI-ID:7002977 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:gradbeništvo, gradbene konstrukcije, potresno inženirstvo

Projekti

Financer:EC - European Commission
Številka projekta:218417-2
Naslov:Performance of Innovative Mechanical Connections in Precast Building Structures under Seismic Conditions
Akronim:SAFECAST

Financer:EC - European Commission
Program financ.:FP7
Številka projekta:314122
Naslov:IMPROVED FASTENING SYSTEMS OF CLADDING WALL PANELSOF PRECAST BUILDINGS IN SEISMIC ZONES
Akronim:SAFECLADDING

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0185
Naslov:Potresno inženirstvo

Podobna dela

Podobna dela v RUL:
  1. Finite element analysis of limit load and localized failure of structures
  2. Numerično modeliranje viskoelastičnih materialov
  3. Analiza 2D konstrukcij z metodo končnih elementov
  4. Topološka optimizacija paličnih jeklenih struktur z uporabo evolucijsko konstrukcijskih metod
  5. Modeliranje mehanskega odziva lupinske konstrukcije inovativne zemeljske postaje
Podobna dela v drugih slovenskih zbirkah:
  1. Uporaba programa COSMOS/M Ver. 1.75 for Windows NT&95 za računanje konstrukcij v gradbeništvu
  2. Elastostatična analiza nosilne konstrukcije kontejnerja po MKE
  3. Uporaba programa COSMOS/Designer I za načrtovanje in računanje konstrukcij
  4. Software for earthquake load dispose on elastic construction frame
  5. Calibration of a new method for creating imperfections on slender structures

Nazaj