Influence of drum inlet air conditions on drying process in a domestic tumble dryer

Novak, Lovrenc (avtor), Gatarić, Pero (avtor), Širok, Brane (avtor)

This study examines how the inlet air temperature, relative humidity, and flow rate influence the textile drying process in an open cycle tumble dryer. An experimental setup was prepared by connecting a domestic tumble dryer to an external system for controlled heating, humidification, and transport of air. Experiments were conducted by drying cotton textiles (8 kg dry mass) at different air inlet conditions. On the basis of measured data, correlations for determination of the total drying time, the moisture evaporation rate during the constant drying rate, and the area-mass transfer coefficient were developed. The process in the drum was modeled by using an established moisture evaporation model, based on sorption isotherms. A commonly used and a recently reported sorption isotherm for cotton were used with the model. Agreement between calculated and measured drying curves was better in case of the commonly used sorption isotherm, but final moisture content was better predicted by the recently reported sorption isotherm.

• Jezik: Angleški jezik
• Ključne besede: heat and mass transfer, mathematical modeling, vented tumble dryer, isotherms, textile drying
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Recenzirani rokopis
• Datum objave: 11.09.2018
• Leto izida: 2019
• Št. strani: Str. 781-792
• Številčenje: Vol. 37, no. 6
• PID: 20.500.12556/RUL-126445
• UDK: 536.7:648.336(045)
• ISSN pri članku: 0737-3937
• DOI: 10.1080/07373937.2018.1461111
• COBISS.SI-ID: 16225819
• Datum objave v RUL: 22.04.2021

NOVAK, Lovrenc, GATARIĆ, Pero in ŠIROK, Brane, 2019, Influence of drum inlet air conditions on drying process in a domestic tumble dryer. Drying technology [na spletu]. 2019. Vol. 37, no. 6, p. 781–792. [Dostopano 16 marec 2025]. DOI 10.1080/07373937.2018.1461111. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=126445

Gradivo je del revije

• Naslov: Drying technology
• Skrajšan naslov: Dry. technol.
• Založnik: Taylor & Francis
• ISSN: 0737-3937
• COBISS.SI-ID: 5922823

Licence

• Licenca: CC BY-NC 4.0, Creative Commons Priznanje avtorstva-Nekomercialno 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc/4.0/deed.sl
• Opis: Licenca Creative Commons, ki prepoveduje komercialno uporabo, vendar uporabniki ne rabijo upravljati materialnih avtorskih pravic na izpeljanih delih z enako licenco.
• Začetek licenciranja: 11.09.2018

• Licenca: CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
• Opis: Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.
• Začetek licenciranja: 11.09.2018

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: prenos toplote in mase, matematično modeliranje, prezračevalni sušilni stroj, izoterme, sušenje tekstila