Tribology of solid-lubricated liquid carbon dioxide assisted machining

Pušavec, Franci (avtor), Sterle, Luka (avtor), Kalin, Mitjan (avtor), Mallipeddi, Dinesh (avtor), Krajnik, Peter (avtor)

An investigation is made into the lubrication capabilities of solid-lubricated liquid carbon dioxide (LCO2) in comparison to flood lubrication, straight LCO2 and oil lubricated LCO2 (MQL). The coefficient of friction is determined via tribological experiments, similar to machining, using an open tribometer which features an uncoated carbide insert sliding against a workpiece. Tribological experiments reveal superior performance of solid-lubricated LCO2. The milling experiments as well indicate that solid-lubricated LCO2 significantly reduces wear. The machined surface topography is examined using high-magnification SEM, which shows no presence of adhered solid particles on the workpiece surface, providing a completely dry machining process.

• Jezik: Angleški jezik
• Ključne besede: machining, lubrication, friction
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2020
• Št. strani: Str. 69-72
• Številčenje: Vol. 69, iss. 1
• PID: 20.500.12556/RUL-126437
• UDK: 539.92:621.89(045)
• ISSN pri članku: 0007-8506
• DOI: 10.1016/j.cirp.2020.04.033
• COBISS.SI-ID: 15739395
• Datum objave v RUL: 22.04.2021

PUŠAVEC, Franci, STERLE, Luka, KALIN, Mitjan, MALLIPEDDI, Dinesh in KRAJNIK, Peter, 2020, Tribology of solid-lubricated liquid carbon dioxide assisted machining. CIRP annals [na spletu]. 2020. Vol. 69, no. 1, p. 69–72. [Dostopano 20 julij 2025]. DOI 10.1016/j.cirp.2020.04.033. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=126437

Gradivo je del revije

• Naslov: CIRP annals
• Skrajšan naslov: CIRP ann.
• Založnik: Technische Rundschau, Hallwag Verlag, Colibri, Elsevier
• ISSN: 0007-8506
• COBISS.SI-ID: 170267

Licence

• Licenca: CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
• Opis: Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.
• Začetek licenciranja: 17.05.2020

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: odrezavanje, mazanje, trenje