Podrobno

Mechanical properties of mineral stone wool fibers based on mixture of blast furnace slag and diabase
ID Imamović, Aida (Avtor), ID Bizjan, Benjamin (Avtor), ID Seferović, Raif (Avtor), ID Mrvar, Primož (Avtor), ID Bombač, David (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (598,38 KB)
MD5: 8930AFEB3AF5E9DC8E30727FE6F71E5D
URLURL - Predstavitvena datoteka, za dostop obiščite http://www.journalijar.com/article/27780/mechanical-properties-of-mineral-stone-wool-fibers-based-on-mixture-of-blast-furnace-slag-and-diabase/ Povezava se odpre v novem oknu

Izvleček
Metallurgical slag is a valuable, but insufficiently used by-product especially from the production of iron and steel.This paper investigates the potential of employing the mixtures of blast furnace slag and naturally occurring minerals in production of mineral wool. Fibers were produced from molten batches of slag-diabase mixtures, and then tested for mechanical properties. Young's modulus and surface hardness of individual fibers were determined by the nanoindentation procedure. Based on experimental results, it can be concluded that mechanical properties of produced fibers are comparable to the properties of nonslag stone wool fibers. This leads to a conclusion that blast furnace slag can be used as the main component in production of mineral wool, largely replacing the natural minerals.

Jezik:Angleški jezik
Ključne besede:mineral wool, fibers, blast furnace slag, spinning machine
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
NTF - Naravoslovnotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2019
Št. strani:Str. 1408-1413
Številčenje:Vol. 7, no. 4
PID:20.500.12556/RUL-126364 Povezava se odpre v novem oknu
UDK:666.198(045)
ISSN pri članku:2320-5407
DOI:10.21474/IJAR01/8967 Povezava se odpre v novem oknu
COBISS.SI-ID:16600603 Povezava se odpre v novem oknu
Datum objave v RUL:19.04.2021
Število ogledov:993
Število prenosov:100
Metapodatki:XML DC-XML DC-RDF
:
IMAMOVIĆ, Aida, BIZJAN, Benjamin, SEFEROVIĆ, Raif, MRVAR, Primož in BOMBAČ, David, 2019, Mechanical properties of mineral stone wool fibers based on mixture of blast furnace slag and diabase. International journal of advanced research [na spletu]. 2019. Vol. 7, no. 4, p. 1408–1413. [Dostopano 29 marec 2025]. DOI 10.21474/IJAR01/8967. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=126364
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:International journal of advanced research
Skrajšan naslov:Int. j. adv. res.
Založnik:Dept. of Zoology, Mata Jijabai Govt. P. G. Girls College
ISSN:2320-5407
COBISS.SI-ID:524169497 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:19.04.2021

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:mineralna volna, žlindra, vlakna, mehanske lastnosti

Projekti

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Federation BiH Ministry of Science and Education

Podobna dela

Podobna dela v RUL:
  1. effect of process parameters on mechanical properties of VCNMO200 steel
  2. effect of process parameters on mechanical properties of EN AW-3003 alloy
  3. effect of process parameters on mechanical properties of EN AW 8021B cold rolled strip
  4. Influence of process parameters on laser surface structuring of Ti-6Al-4V
  5. ǂThe ǂinfluence of composition and process parameters on the stability of xanthan gel
Podobna dela v drugih slovenskih zbirkah:
  1. INFLUENCE OF PROCESS PARAMETERS ON THE FINAL ALGINATE AEROGELS PROPERTIES
  2. Impact of process parameters on the slip ring quality
  3. Impact of process parameters on the quality and stability of Echinacea purpurea extract
  4. IMPACT OF PROCESS PARAMETERS ON THE EXTRACTION OF MACROLIDE LACTAMS FROM THE FERMENTATION BROTH WITH TOLUENE
  5. EXPERIMENTAL STUDY OF THE IMPACT OF PROCESS PARAMETERS ON THE CONCENTRATION PROFILES IN ACYLATION SYMMETRIC DIOL WITH CARBOXYLIC ACID IN THE PRESENCE OF AN ACID CATALYST

Nazaj