izpis_h1_title_alt

Influence of digital elevation model resolution on rockfall modelling
Žabota, Barbara (Avtor), Repe, Blaž (Avtor), Kobal, Milan (Avtor)

URLURL - Izvorni URL, za dostop obiščite https://doi.org/10.1016/j.geomorph.2018.12.029 Povezava se odpre v novem oknu

Izvleček
Spatial models are an effective tool for determining potential rockfall source, transit and deposit areas. The reliability of the final rockfall modelling results depends on the quality of the input data, which is mostly based on the digital elevation model (DEM). The spatial resolution of the DEM holds key information about the main morphological properties of the surface, which is crucially important when modelling this kind of geomorphological phenomenon. Therefore, this article studies the influence of DEM spatial resolution on the modelling of rockfall source, transit and deposit areas. Modelling was carried out at five different DEM spatial resolutions available for Slovenia (1m, 5m, 12.5m, 25m and 100m). Rockfall source areas were identified using a geomorphometric approach based on a high resolution DEM and a geographical information system. Rockfall transit and deposit areas were modelled using the Conefall computer program, which is designed to estimate potential rockfall risk areas. The area of study was the municipality of Vipava (107.4km2) in Slovenia, EU. A spatial resolution of 1m was chosen as a reference layer to which all modelling results of the other spatial resolutions were compared. Validation of modelling included rockfall source area comparison with orthorectified aerial images and location collection of silent witnesses (rock deposits) in the field for estimating maximum runout zones. The modelling results indicate that a spatial resolution of 1m is the most suitable for modelling on a local scale; resolutions of 5, 12.5 and 25m can be used for modelling on a regional scale (depending on the purpose of the modelling results); and a resolution of 100m should not be used for rockfall modelling. Major differences between spatial resolutions can be observed when modelling rockfall source areas, i.e. in areas with the most diverse topography, while in deposit areas the observed differences are smaller due to the less rugged surface.

Jezik:Angleški jezik
Ključne besede:natural hazard, risk mapping, rockfall source area, rockfall runout zone
Vrsta gradiva:Znanstveno delo (r2)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:BF - Biotehniška fakulteta
Leto izida:2019
Št. strani:str. 183-195
Številčenje:Vol. 328
UDK:630*38
ISSN pri članku:0169-555X
DOI:10.1016/j.geomorph.2018.12.029 Povezava se odpre v novem oknu
COBISS.SI-ID:5288358 Povezava se odpre v novem oknu
Število ogledov:120
Število prenosov:44
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:naravne nesreče, kartiranje ogroženosti, območje proženja skalnih podorov, območje odlaganja skalnih podorov, porušitvena erozija, hudourništvo

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj