Overheating reduction in lightweight framed buildings with application of phase change materials

Zavrl, Eva (avtor), Zupanc, Gašper (avtor), Stritih, Uroš (avtor), Dovjak, Mateja (avtor)

The trend of lightweight framed building structures is gaining in popularity. Due to lower accumulation capability and thermal stability, buildings might be inclined to higher risk of overheating. The purpose of this study is to investigate overheating in lightweight framed buildings from the aspect of thermal comfort and energy efficiency in cooling season. Single-family house was modelled using DesignBuilder and located in moderate climate (Ljubljana, Slovenia). Heavyweight structure was compared to lightweight structure coupled with all 14 variations of phase change materials (PCM). Different strategies of PCM encapsulation (microencapsulated plasterboards, macroencapsulated additional layer), melting points (23 °C, 24 °C, 25 °C, 26 °C, 27 °C), capacities (M182, M91 M51, M27) and thicknesses (125 mm, 250 mm) of PCM were investigated and compared. The best passive solution was primarily evaluated based on the thermal comfort characteristics: average zone operative temperature (To) bends in cooling season. Secondarily, the additional energy needed for cooling within each solution was compared to the maximum allowed annual energy consumed for cooling specified in legislation. Consequently, the most influential parameter was the melting point of the PCM structure. Based on the chosen criteria, the overheating was significantly reduced using macroencapsulated layer with melting point of 24 °C and minimum capacity of M51 (max. To 26.3 °C). Heavyweight structure enabled lower To (27.1 °C) in the building compared to microencapsulated plasterboard solution with melting point at 23°C and thickness of 250 mm (28.8 °C). Correctly designed passive solution can be used for the improvement of the design strategy and legislation towards overheating prevention.

• Jezik: Angleški jezik
• Ključne besede: overheating, lightweight framed buildings, phase change materials, thermal comfort, energy efficiency
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2020
• Št. strani: Str. 3-14
• Številčenje: Vol. 66, no. 1
• PID: 20.500.12556/RUL-113721
• UDK: 620.9(045)
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2019.6244
• COBISS.SI-ID: 17015835
• Datum objave v RUL: 29.01.2020

ZAVRL, Eva, ZUPANC, Gašper, STRITIH, Uroš in DOVJAK, Mateja, 2020, Overheating reduction in lightweight framed buildings with application of phase change materials. Strojniški vestnik [na spletu]. 2020. Vol. 66, no. 1, p. 3–14. [Dostopano 21 avgust 2025]. DOI 10.5545/sv-jme.2019.6244. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=113721

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: pregrevanje, lahka gradnja, fazno spremenljive snovi, toplotno ugodje, raba energije

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0158
• Naslov: Gradbene konstrukcije in gradbena fizika

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0223
• Naslov: Prenos toplote in snovi