Optimizacija procesa izdelave lesenih šahovskih figur s 4 osnim CNC obdelovalnim strojem

Škulj, Domen (avtor), Merhar, Miran (mentor)

V nalogi smo optimizirali proces izdelave lesenih šahovskih figur na 4 osnem CNC obdelovalnem stroju. Šahovske figure smo najprej modelirali v programu Solidworks, nato pa s programom SolidCAM izdelali G kodo, potrebno za krmiljenje CNC stroja. V procesu več osne obdelave figur smo uporabili različne možnosti obdelave, od funkcij za ravninsko obdelavo pa vse do različnih funkcij za 4 osno obdelavo. Na podlagi kvalitete obdelave in zmožnosti stroja večosne obdelave smo določili najbolj optimalen način obdelave. Ugotovili smo, da z operacijo več osnega simultanega rezkanja glede na tehnološke zmožnosti stroja dobimo boljše kvalitete obdelave v primerjavi z rotacijsko obdelavo, vendar pa slednja nudi hitrejše in enostavnejše programiranje v programu SolidCAM.

• Jezik: Slovenski jezik
• Ključne besede: les, šahovske figure, optimizacija procesa, CNC rezkanje, programiranje, SolidWorks, SolidCAM
• Vrsta gradiva: Diplomsko delo/naloga
• Tipologija: 2.11 - Diplomsko delo
• Organizacija: BF - Biotehniška fakulteta
• Založnik: [D. Škulj]
• Leto izida: 2018
• PID: 20.500.12556/RUL-103335
• UDK: 674.5
• COBISS.SI-ID: 2946185
• Datum objave v RUL: 16.09.2018

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Optimization of the manufacturing process of wooden chess pieces with 4 axis CNC machine

Izvleček

In the thesis, the optimization of the manufacturing process of wooden chess pieces with 4 axis CNC machine has been described. Chess pieces were firstly modeled in the SolidWorks software and then G code, which was required to control CNC machine was generated using SolidCAM software. In the process of multiple axis milling, various options of production were used, from the plane processing functions to various functions for 4 axis production. Based on the quality and CNC machine ability of the multiple axis milling, the most optimal process of manufacturing was described. It was found out, that operation Simoultaneous 5-Axis Milling gave us under given circumstances better quality results as Rotary machining, which is which is from the perspective of programming in SolidCAM faster and easier.

• Ključne besede: wood, chess pieces, optimization process, CNC milling, programming, SolidWorks, SolidCAM