Mechanical properties and drug permeability of the PA6 membranes prepared by immersion precipitation from PA6 - formic acid - water system

Aulova, Alexandra (avtor), Cvenkel, Anže (avtor), Žakelj, Simon (avtor), Planinšek, Odon (avtor), Kristl, Albin (avtor), Emri, Igor (avtor)

The paper presents the effect of polymer solution composition on the morphology, mechanical properties and drug permeability of the asymmetric polyamide 6 (PA6) membranes prepared by immersion precipitation. The effect of polymer solution composition on morphology, mechanical properties and permeability of the produced membrane is considered, since these properties are of relevance for drug delivery applications. PA6-formic acid-deionized water solutions were used to prepare membranes for further characterization with differential scanning calorimetry and scanning electron microscopy for morphology analysis, tensile testing and drug permeability tests. The results show that the amount of PA6 does not significantly affect morphology of the membrane, while having pronounced effect on tensile elastic modulus (50% increase). On the other hand, the concentration of formic acid in solution (dissolution intensity) influences crystallization dynamics and significantly changes the morphology of membrane (in the range of approximately 75-100 wt% of formic acid concentrations), consequently having effect on drug permeability.

• Jezik: Angleški jezik
• Ključne besede: polyamide 6, formic acid, immersion precipitation, tensile test, drug permeability
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2018
• Št. strani: Str. 67-75
• Številčenje: Vol. 562
• PID: 20.500.12556/RUL-101463
• UDK: 678.675(045)
• ISSN pri članku: 0376-7388
• DOI: 10.1016/j.memsci.2018.05.022
• COBISS.SI-ID: 16094747
• Datum objave v RUL: 06.06.2018

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: poliamid 6, mravljična kislina, precipitacija pri potapljanju, natezni preizkus, prepustnost zdravil

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: L2-7550, P2-0264, P1-0189
• Naslov: Nano strukturirani vlaknasti materiali za ciljno depozicijo zdravilnih učinkovin, izdelanih z elektrospinningom