izpis_h1_title_alt

Primerjava kakovosti in cene dveh sistemov površinske obdelave notranjih vrat : diplomsko delo (visokošolski strokovni študij)
ID Dolar, Uroš (Author), ID Petrič, Marko (Mentor) More about this mentor... This link opens in a new window, ID Oblak, Leon (Reviewer)

.pdfPDF - Presentation file, Download (301,56 KB)
MD5: 79B0A5DBE232BBC5081D7CC604385783
PID: 20.500.12556/rul/0f75ad6e-6c90-456f-8747-de6686dc7ab8

Abstract
V lesnoindustrijskem podjetju želijo s spremembo postopka površinske obdelave znižati stroške izdelave notranjih vrat. Sedanji postopek površinske obdelave je tak, da obdelovanci skozi lakirno linijo potujejo dvakrat. Po novem bi, ob največjem možnem izkoristku, vrata prek valjčne nanašalne linije potovala le enkrat. S tem bi se stroški izdelave znižali, kakovost pa ostala nespremenjena ali pa bi se celo izboljšala. Primerjali smo rezultate obeh različnih sistemov nanašanja in ugotovili, da tehnološka sprememba površinske obdelave z enim prehodom skozi lakirno linijo ne poslabša kakovosti površinske obdelave vrat. Tudi stroški izdelave so pri novem sistemu nižji kot pri obstoječem tehnološkem postopku.

Language:Slovenian
Keywords:površinska obdelava, vrata, kakovost, cena
Work type:Undergraduate thesis
Typology:2.11 - Undergraduate Thesis
Organization:BF - Biotechnical Faculty
Place of publishing:Ljubljana
Publisher:[U. Dolar]
Year:2005
Number of pages:VIII, 47 f.
PID:20.500.12556/RUL-92 This link opens in a new window
UDC:674.07:65
COBISS.SI-ID:1332873 This link opens in a new window
Publication date in RUL:11.07.2014
Views:2297
Downloads:367
Metadata:XML RDF-CHPDL DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Secondary language

Language:English
Title:Comparison of quality and price of two systems for interior door finishing : graduation thesis (higher professional studies)
Abstract:
Wood processing industrial enterprise wants to cut down costs of interior door manufacturing by changing the finishing process. The current finishing procedure consists of 2 passages through the roller coating installation. In the new procedure, only 1 passage would be performed, with a maximum possible effectiveness, reduceing the production costs. In this way, the quality would remain unchanged or even improved. The results of the both application procedures were compared. It was concluded that the proposed technological change with a single passage through the roller coating installation does not affect the quality of the surface coating system. Manufacture costs of new system are also lower than those of the current technological process.

Keywords:wood finishing, door, quality, price

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back