IZDELAVA, UPORABA IN DELOVANJE CNC STROJA

DEDUKIĆ, TADEJ (author), Logar, Vito (mentor)

Diplomsko delo opisuje izdelavo, uporabo in delovanje CNC stroja, ki je ključno orodje za izdelavo raznovrstnih izdelkov. Diplomsko delo je sestavljeno iz treh delov. V prvem delu je predstavljen CNC stroj ter njegov namen oz. uporaba. V drugem delu je opisano delovanje CNC stroja, njegova zgradba oz. sestavni deli ter programska oprema, ki je potrebna za delovanje oz. pogon stroja. Predstavljena sta dva programa, vsak izmed njiju pa uporablja drugačen način komunikacije. V tem delu so predstavljeni tudi različni problemi in rešitve za pravilno in učinkovito delovanje stroja. V tretjem delu je opisan lasten poskus pri gradnji CNC stroja za graviranje in izdelovanje tiskanih vezij. Opisuje predvsem težave, katere srečamo pri izgradnji, programiranju in kalibraciji stroja, vsebuje pa tudi testni izdelek, ki sem ga obdelal z izdelanim strojem.

• Language: Slovenian
• Keywords: avtomatizacija, rezkanje, CNC
• Work type: Bachelor thesis/paper
• Organization: FE - Faculty of Electrical Engineering
• Year: 2015
• PID: 20.500.12556/RUL-72131
• Publication date in RUL: 04.09.2015

Secondary language

• Language: English
• Title: DESIGN, USAGE AND OPERATION OF THE CNC MACHINE

Abstract

The thesis describes the construction, use and operation of CNC machine, which is an essential tool for making a wide range of products. The thesis consists of three parts. The first part presents a CNC machine, and its purpose and use. The second part describes in particular the operation of the CNC machine, and its structure and components, and software needed for the operation and drive of the machine. Presented are two programs, each of which uses a different method of communication. This section also presents various problems and solutions for the proper and efficient functioning of the machine. The third part describes my own attempt at building a CNC machine for engraving and manufacturing of printed circuit boards. It describes in particular the obstacles which we encounter in construction and the programming and calibration of the machine. It also contains a test, which I passed with an elaborate machine.

• Keywords: automation, milling, CNC