Details

Načrtovanje NFC vezja za merjenje temperature in vlage znotraj strukture fotonapetostnega modula
ID URBANČIČ, MARK (Author), ID Jankovec, Marko (Mentor) More about this mentor... This link opens in a new window

.pdfPDF - Presentation file, Download (3,74 MB)
MD5: 97C681E8E77DECA65EA6ED8489A04EF4

Abstract
V magistrskem delu obravnavamo razvoj majhnega NFC sistema za merjenje temperature in vlage znotraj fotonapetostnih modulov. Poseben poudarek namenimo načrtovanju in optimizaciji NFC antene, ki mora zaradi omejenega prostora omogočati zanesljivo komunikacijo pri majhnih dimenzijah. Izdelamo in preizkusimo antene dimenzij 15 × 15 mm, 20 × 20 mm in 25 × 25 mm. Ugotovimo, da tudi najmanjša antena dimenzij 15 × 15 mm omogoča NFC komunikacijo, vendar je njeno delovanje odvisno od jakosti oddajnega polja čitalca. Zaradi relativno šibke oddaje bližnjega magnetnega polja pametni telefoni ne omogočajo zanesljive komunikacije z najmanjšo anteno, zato je za stabilno delovanje potreben ločen NFC čitalec z močnejšim oddajnim poljem. Pokažemo tudi, da vgradnja antene v fotonapetostni modul pomembno vpliva na njene električne karakteristike. Potrebna kompenzacijska kapacitivnost antene se zaradi vpliva okolice poveča iz približno 150 pF na približno 250 pF. Na podlagi teh ugotovitev razvijemo NFC vezje, ki ga lahko vgradimo v fotonapetostni modul in omogoča brezžično odčitavanje meritev.

Language:Slovenian
Keywords:NFC, antena, prilagajanje antene, energija, meritve, fotonapetostni modul
Work type:Master's thesis/paper
Typology:2.09 - Master's Thesis
Organization:FE - Faculty of Electrical Engineering
Year:2026
PID:20.500.12556/RUL-181110 This link opens in a new window
COBISS.SI-ID:274885891 This link opens in a new window
Publication date in RUL:25.03.2026
Views:308
Downloads:157
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Secondary language

Language:English
Title:Design of an NFC-Based Circuit for Temperature and Humidity Measurement within Photovoltaic Module Structure
Abstract:
In this master’s thesis, we address the development of a small NFC system for measuring temperature and humidity inside photovoltaic modules. Special emphasis is placed on the design and optimization of the NFC antenna, which must enable reliable communication despite its small dimensions and limited available space. Antennas with dimensions of 15×15 mm, 20×20 mm and 25×25 mm are fabricated and tested. We find that even the smallest antenna, measuring 15 × 15 mm, enables NFC communication; however, its operation depends on the strength of the reader’s transmitted field. Due to the relatively weak near-field magnetic transmission of smartphones, they do not enable reliable communication with the smallest antenna. Therefore, stable operation requires a dedicated NFC reader with a stronger transmitted field. We also show that integrating the antenna into a photovoltaic module significantly affects its electrical characteristics. The required compensation capacitance of the antenna increases due to environmental influences from approximately 150 pF to approximately 250 pF. Based on these findings, we develop an NFC circuit that can be integrated into a photovoltaic module and enables wireless readout of measurements.

Keywords:NFC, antenna, antenna matching, energy, measurements, photovoltaic module

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back