Experimental investigation on SS202 using tubular and double D tubular electrode tool in electrical discharge drilling machining

Pandiyan, Manikandaprabu (author), Kandasamy Ganesan, Saravanan (author)

To meet the demands of the manufacturing industry, a more robust approach is needed for current manufacturing processes. Machining of very hard materials with excellent dimensional accuracy and surface integrity is a challenging task, Currently, the electrical discharge machining (EDM) process is the optimal solution for machining such materials. Electrical discharge drilling machines find applications in various sectors such as aerospace, automobile and medicine. In this research, two different brass electrode geometries are considered: tubular electrode tool (TET) and double D tubular electrode tool (DDTET) on an SS202 work-piece. The input parameters of peak current (PI), pulse time ON (PONT), and pulse time OFF (POFFT) were varied. The output response measured and compared were material removal rate (MRR) and over cut (OC). The Taguchi technique was used to design the l16 orthogonal array (OA) experiment, and analysis of variance (ANOVA) was employed for result analysis using Minitab20 statistical software package. The results showed that the DDTET method produced significantly better MRR and OC improvements of 21.66 % and 2.28 % respectively. Additionally, a study was conducted on the formation of the recast layer (RL) and the heat affected zone (HAZ).

• Language: English
• Keywords: modified electrode geometry, material removal rate, over cut, recast layer, analysis of variance
• Typology: 1.01 - Original Scientific Article
• Organization: FS - Faculty of Mechanical Engineering
• Publication status: Published
• Publication version: Version of Record
• Submitted for review: 27.06.2024
• Article acceptance date: 04.10.2024
• Publication date: 01.12.2024
• Year: 2024
• Number of pages: Str. 595-606
• Numbering: Vol. 70, no. 11/12
• PID: 20.500.12556/RUL-166836
• UDC: 621
• ISSN on article: 2536-3948
• COBISS.SI-ID: 224014851
• Publication date in RUL: 27.01.2025

PANDIYAN, Manikandaprabu and KANDASAMY GANESAN, Saravanan, 2024, Experimental investigation on SS202 using tubular and double D tubular electrode tool in electrical discharge drilling machining. Strojniški vestnik [online]. 2024. Vol. 70, no. 11/12, p. 595–606. [Accessed 13 March 2025]. Retrieved from: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=eng&id=166836

Record is a part of a journal

• Title: Strojniški vestnik
• Shortened title: Stroj. vestn.
• Publisher: Fakulteta za strojništvo
• ISSN: 2536-3948
• COBISS.SI-ID: 294943232

Licences

• License: CC BY 4.0, Creative Commons Attribution 4.0 International
• Link: http://creativecommons.org/licenses/by/4.0/
• Description: This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.

Secondary language

• Language: Slovenian
• Keywords: modificirana geometrija elektrod, stopnja odvzema materiala, nadmera, pretaljeni sloj, ANOVA