Details

The use of heuristic optimization techniques on RV cycloid reducer design : a comparative study
ID Korkmaz, Furkan (Author), ID Dereli, Serkan (Author), ID Karayel, Durmuş (Author), ID Kolip, Ahmet (Author)

.pdfPDF - Presentation file, Download (1,55 MB)
MD5: 6A6BA0581520E228DD6A80F2F68DA3C0
URLURL - Source URL, Visit https://www.sv-jme.eu/?ns_articles_pdf=/ns_articles/files/ojs30/921/66cc418117a0c.pdf&id=7057 This link opens in a new window

Abstract
In this study, heuristic optimization algorithms such as particle swarm optimization (PSO) and quantum particle swarm optimization (QPSO) have been used to optimize the weight of the cycloid reducer based on the values of some parameters. The algorithms were applied separately to the design problem, and their performances were compared. Initially, a basic design was performed using conventional approaches. Constraint conditions have been defined based on geometric features and the essential component of the reducer, the cycloidal gear, and then the existing basic design has been optimized in terms of size and weight. Finally, finite element analysis was conducted to validate the obtained parameter values and control the stresses in the contact areas of the cycloid gear profile. It has been determined that PSO reduced the weight of the basic design by 33.3 %, whereas QPSO reduced it by 33.8 %. Moreover, the results of the finite element analysis showed that the design obtained according to both optimization methods was safe in terms of the resulting stresses. Consequently, it has been demonstrated that the selected design parameters and constraint equations have been sufficient and that the basic designs could be enhanced using intuitive optimization methods.

Language:English
Keywords:cycloid reducer, finite element analysis, optimization, heuristic algorithm
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FS - Faculty of Mechanical Engineering
Publication status:Published
Publication version:Version of Record
Year:2024
Number of pages:Str. 392-402
Numbering:Vol. 70, no. 7/8
PID:20.500.12556/RUL-163470 This link opens in a new window
UDC:531/533
ISSN on article:0039-2480
DOI:10.5545/sv-jme.2024.921 This link opens in a new window
COBISS.SI-ID:210446339 This link opens in a new window
Publication date in RUL:07.10.2024
Views:91
Downloads:3746
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Strojniški vestnik
Shortened title:Stroj. vestn.
Publisher:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:0039-2480
COBISS.SI-ID:762116 This link opens in a new window

Licences

License:CC BY 4.0, Creative Commons Attribution 4.0 International
Link:http://creativecommons.org/licenses/by/4.0/
Description:This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.

Secondary language

Language:Slovenian
Title:Uporaba hevrističnih optimizacijskih tehnik pri konstruiranju cikloidnih reduktorjev: primerjalna študija
Keywords:cikloidni reduktorji, metoda končnih elementov, optimizacija, hevristični algoritmi

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back