Analiza tehnične čistosti obdelovancev pri odrezovalnih procesih

Ozmec, Vid (author), Kramar, Davorin (mentor), Pušavec, Franci (comentor)

Magistrska naloga obravnava eksperimentalno analizo tehnične čistosti za različne tipe, procesov odrezavanja. Ker so obdelovanci po odrezavanju kontaminirani, je potrebno, posamezne kontaminacije izmeriti za različne variacije procesnih parametrov. Po obdelavi sta se izvedla dva načina čiščenja površine, ki sta bila primerjana z neočiščenim obdelovancem. Meritve so bile izvedene z metodo, ki temelji na emitirani fluorescenci s površine. Skozi celoten proces smo sledili standardu ISO 14644-10:2022, ki ocenjuje, čistost površine glede na kemično kontaminacijo in standardu ISO 14644-13:2022, ki opisuje čistilne metode za doseganje želene čistosti v smislu klasifikacij delcev in kemične kontaminacije.

• Language: Slovenian
• Keywords: eksperimentalna analiza, tehnična čistost, odrezavanje, standard ISO 14644-10:2022, standard ISO 14644-13:2022, kontaminacija, merjenje
• Work type: Master's thesis/paper
• Typology: 2.09 - Master's Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Place of publishing: Ljubljana
• Publisher: [V. Ozmec]
• Year: 2024
• Number of pages: XX, 68 str.
• PID: 20.500.12556/RUL-155409
• UDC: 621.9:621.7.01:519.6(043.2)
• COBISS.SI-ID: 191699971
• Publication date in RUL: 30.03.2024

OZMEC, Vid, 2024, Analiza tehnične čistosti obdelovancev pri odrezovalnih procesih [online]. Master’s thesis. Ljubljana : V. Ozmec] . [Accessed 25 April 2025]. Retrieved from: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=eng&id=155409

Secondary language

• Language: English
• Title: Analysis of technical cleanliness of workpieces in cutting processes

Abstract

The master's thesis addresses an experimental analysis of technical cleanliness for various types of machining processes. Since the workpieces are contaminated after machining, it's necessary to evaluate individual contaminations for different variations of process parameters. After processing, two surface cleaning methods were implemented, which were compared with an uncleaned workpiece. Measurements were conducted using a method based on emitted fluorescence from the surface. Throughout the entire process, we adhered to the standards ISO 14644-10:2022, which assesses surface cleanliness in terms of chemical contamination, and ISO 14644-13:2022, which describes cleaning methods for achieving desired cleanliness in terms of particle and chemical contamination classifications.

• Keywords: experimental analysis, technical cleanliness, machining, standard ISO 14644-10:2022, standard ISO 14644-13:2022, contamination, measurment