izpis_h1_title_alt

Transmission loss measurement of recycled granular material using wave decomposition by impulse response extraction based on deconvolution
ID Železnik, Anže (Author), ID Murovec, Jure (Author), ID Čurović, Luka (Author), ID Cerkovnik, Nejc (Author), ID Prezelj, Jurij (Author)

.pdfPDF - Presentation file, Download (2,04 MB)
MD5: 5E8764E043D2E3ADCD273A7A7782C749
URLURL - Source URL, Visit https://www.sciencedirect.com/science/article/pii/S0003682X23002967 This link opens in a new window

Abstract
A simplified method for measuring transmission loss with a single fixed microphone inside an impedance tube is proposed. The separation of the incident wave from the reflected wave is achieved by deconvolving the loudspeaker driver voltage signal with the microphone signal to extract the impulse response. Random noise and a sinusoidal sweep signal were used as excitation signals for extraction of the impulse response, and two deconvolution methods were employed: linear deconvolution based on the adaptive LMS algorithm and simple spectral division. To avoid the overlap of incident and reflected pulses, a long impedance tube was used. Using a long impedance tube eliminates the need for an anechoic tube termination and the need to calibrate microphones. It is found that a reflective tube termination provides more accurate results compared to an approximately anechoic termination. The approximately anechoic termination shortens the available time window of the reflected pulse because it reflects some of the low-frequency sound. The standard deviation of the results and the dynamic range of the proposed method were determined experimentally. The applicability of the new method was tested on samples of unconsolidated granular material recycled from construction sites. The measured transmission losses of the different granular fractions were compared with a theoretical model for transmission losses at low frequencies. Samples consisting of smaller granule fractions were found to have surprisingly high transmission loss values. The design of the extended vertical impedance tube in combination with the proposed method is cost effective, speeds up the measurement procedure and provides reliable results.

Language:English
Keywords:transmission loss, impedance tube, pulse separation, wave decomposition, deconvolution, granular materials
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FS - Faculty of Mechanical Engineering
Publication status:Published
Publication version:Version of Record
Year:2023
Number of pages:10 str.
Numbering:Vol. 211, art. 109498
PID:20.500.12556/RUL-149724 This link opens in a new window
UDC:534:62-492
ISSN on article:0003-682X
DOI:10.1016/j.apacoust.2023.109498 This link opens in a new window
COBISS.SI-ID:163841027 This link opens in a new window
Publication date in RUL:08.09.2023
Views:626
Downloads:76
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Applied acoustics
Shortened title:Appl. Acoust.
Publisher:Elsevier Science
ISSN:0003-682X
COBISS.SI-ID:24982016 This link opens in a new window

Licences

License:CC BY-NC-ND 4.0, Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Link:http://creativecommons.org/licenses/by-nc-nd/4.0/
Description:The most restrictive Creative Commons license. This only allows people to download and share the work for no commercial gain and for no other purposes.

Secondary language

Language:Slovenian
Keywords:prenosne izgube, impedančna cev, ločevanje pulzov, valovna dekompozicija, dekonvolucija, granulirani materiali

Projects

Funder:ARRS - Slovenian Research Agency
Project number:P2-0401
Name:Energetsko strojništvo

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back