Your browser does not allow JavaScript!
JavaScript is necessary for the proper functioning of this website. Please enable JavaScript or use a modern browser.
Open Science Slovenia
Open Science
DiKUL
slv
|
eng
Search
Browse
New in RUL
About RUL
In numbers
Help
Sign in
Finite element analysis of notch depth and angle in notch shear cutting of stainless-steel sheet
ID
Emre Engin, Kaan
(
Author
)
PDF - Presentation file,
Download
(2,30 MB)
MD5: F08438549494CBF92675FA00CAAB3BC6
URL - Source URL, Visit
https://www.sv-jme.eu/sl/article/fem-investigation-of-notch-depth-and-angle-in-notch-shear-cutting-of-stainless-steel-sheets/
Image galllery
Abstract
Piercing is a crucial process in the sheet metal forming industry, and the surface quality of the pierced part is an important parameter that defines the overall quality of the product. However, obtaining a good surface quality is a challenging task that depends on the effect of several process parameters and necessitates the use of non-conventional procedures. Notch shear cutting is a relatively new progressive approach in which the workpiece is indented with a notch form with a predefined notch angle and depth, and then the indented workpiece is subjected to conventional piercing. In this study, conventional piercing and notch shear cutting processes were experimentally performed on 1.4301 stainless steel sheet of 2 mm thickness. Then, finite element (FE) analyses were conducted utilizing Deform-2D software. After ensuring that the experimental and simulation works were consistent with each other, the FE analysis of notch shear cutting was carried out for three distinct notch depths (15 %, 30 %, and 60 % of the workpiece thickness) and six different notch angles (10º, 20º, 30º, 40º, 50º, and 60º). Investigations were performed on shear zone length distributions, which are direct indications of the surface quality on sheared workpieces, crack propagation angles, and required cutting loads. The best surface quality was obtained when the notch angle was set to 50º and the notch depth was set to 15 % of the workpiece thickness. It was also observed that notch angle and notch depth had a certain level of influence on required cutting load.
Language:
English
Keywords:
metal cutting
,
notch cutting
,
piercing
,
surface quality
Work type:
Article
Typology:
1.01 - Original Scientific Article
Organization:
FS - Faculty of Mechanical Engineering
Publication status:
Published
Publication version:
Version of Record
Year:
2023
Number of pages:
Str. 326-338
Numbering:
Vol. 69, no. 7/8
PID:
20.500.12556/RUL-148936
UDC:
621.9:519.61
ISSN on article:
0039-2480
DOI:
10.5545/sv-jme.2023.541
COBISS.SI-ID:
159343363
Publication date in RUL:
01.09.2023
Views:
845
Downloads:
38
Metadata:
Cite this work
Plain text
BibTeX
EndNote XML
EndNote/Refer
RIS
ABNT
ACM Ref
AMA
APA
Chicago 17th Author-Date
Harvard
IEEE
ISO 690
MLA
Vancouver
:
Copy citation
Share:
Record is a part of a journal
Title:
Strojniški vestnik
Shortened title:
Stroj. vestn.
Publisher:
Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:
0039-2480
COBISS.SI-ID:
762116
Licences
License:
CC BY 4.0, Creative Commons Attribution 4.0 International
Link:
http://creativecommons.org/licenses/by/4.0/
Description:
This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.
Secondary language
Language:
Slovenian
Title:
Analiza globine in kota zareze po metodi končnih elementov pri izsekovanju nerjavne jeklene pločevine s predzarezovanjem
Keywords:
luknjanje
,
izsekovanje s predzarezovanjem
,
rezalne sile
,
kot zareze
,
globina zareze
,
oblikovanje srha
,
strižna cona
,
kakovost površine
Similar documents
Similar works from RUL:
Similar works from other Slovenian collections:
Back