Primerjava metod za določitev toplotne obremenitve stavb pri ogrevanju in hlajenju

Hawlina, Max (author), Medved, Sašo (mentor)

Obravnavan problem oziroma vprašanje se nanaša na BIM program Revit. V nalogi smo ugotavljali ali je energetska analiza programa Revit dovolj natančna, da bi to orodje lahko uporabili, za načrtovanje toplotnih tokov ogrevalnih in hladilnih sistemov v stavbah. Reševanja problema smo se lotili tako, da smo postavili referenčni model, zanj pa naredili izračun s programom Revit, s programom IDA in z inženirsko metodo po relavantnih standardih. Dobljene rezultate smo nato primerjali in določili posebnosti, zaradi katerih pride do razlik pri preračunih. Na koncu pa smo napisali še ugotovitve glede programa Revit.

• Language: Slovenian
• Keywords: stavbe, računalniško modeliranje, toplotna obremenitev stavb, statično in dinamično modeliranje, Revit
• Work type: Bachelor thesis/paper
• Typology: 2.11 - Undergraduate Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Place of publishing: Ljubljana
• Publisher: [M. Hawlina]
• Year: 2023
• Number of pages: XXII, 58 str., [11] str. pril.
• PID: 20.500.12556/RUL-148664
• UDC: 536.28:697.14(043.2)
• COBISS.SI-ID: 168246787
• Publication date in RUL: 29.08.2023

Secondary language

• Language: English
• Title: Comparison of methods for determining the thermal load of buildings for heating and cooling

Abstract

The discussed problem or question refers to the Revit BIM software. We were trying to establish whether Revit's energy analysis is accurate enough to be able to be used for calculating thermal loads. To tackle this issue we set up a reference model and performed calculations using the Revit software, the IDA software, and the engineering method based on specific standards. Subsequently, we compared the obtained results and set out particular aspects that lead to differences in the calculations. Finally, we concluded deductions about the Revit software.

• Keywords: buildings, computer modeling, thermal load of buildings, static and dynamic modeling, Revit