izpis_h1_title_alt

The dynamic behaviour of symmetrical laminated nano-composite containing equal numbers of glass and carbon fibre layers
ID Mohammed, Ava A. K. (Author), ID Hassan, Gailan Ismail (Author), ID Khdir, Younis Khalid (Author)

.pdfPDF - Presentation file, Download (1,16 MB)
MD5: 7BC0776EFD577529EEC7CF8CB2F400A8
URLURL - Source URL, Visit https://www.sv-jme.eu/sl/article/dynamical-behavior-of-symmetrical-laminated-nano-composite-containing-equal-numbers-of-glass-and-carbon-fibers/ This link opens in a new window

Abstract
Fibre-reinforced polymer composite has many uses in structural components that required high strength, stiffness, and damping capacity. Cross and quasi-laminated epoxy composites with and without nano Al2O3 were used in this investigation to determine flexural modulus, natural frequency, damping ratio, and mode shapes by using analytical, experimental, and numerical (ANSYS) methods. It was demonstrated that adding 2 % nano Al2O3 improved the flexural modulus and the damping ratio while decreased the natural frequency. Cross number 2 and quasi number 2 had the highest natural frequency for cross and quasi laminate groups which are equal to 23.5 Hz and 20.25 Hz experimentally, respectively. On the other hand, the higher damping ratio was achieved for cross number 1 with nano Al2O3 and quasi number 2 with nano Al2O3 for both cross and quasi laminates, which are equal to 0.707 % and 0.693 %, respectively. The flexural modulus and damping ratio are inversely related to each other. However, the novelty in this article is that by adding two glass plies at the outer surface of quasi group laminate the flexural modulus, natural frequency, and damping ratio are increased simultaneously, as in the configurations quasi number 2 and quasi number 2 with nano Al2O3 in comparison with quasi number 1 and quasi number 1 with nano Al2O3.

Language:English
Keywords:cross laminate, quasi laminate, natural frequency, damping ratio, nanoparts
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FS - Faculty of Mechanical Engineering
Publication status:Published
Publication version:Version of Record
Year:2023
Number of pages:Str. 224-234
Numbering:Vol. 69, no. 5/6
PID:20.500.12556/RUL-146675 This link opens in a new window
UDC:620.3:531.3
ISSN on article:0039-2480
DOI:10.5545/sv-jme.2022.403 This link opens in a new window
COBISS.SI-ID:154620163 This link opens in a new window
Publication date in RUL:06.06.2023
Views:323
Downloads:59
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Strojniški vestnik
Shortened title:Stroj. vestn.
Publisher:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:0039-2480
COBISS.SI-ID:762116 This link opens in a new window

Licences

License:CC BY 4.0, Creative Commons Attribution 4.0 International
Link:http://creativecommons.org/licenses/by/4.0/
Description:This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.

Secondary language

Language:Slovenian
Title:Dinamične lastnosti simetrično laminiranih nanokompozitov, ki vključujejo enako število steklenih in ogljikovih vlaken
Keywords:križni laminat, kvazi laminat, modul elastičnosti pri upogibu, lastna frekvenca, faktor dušenja, nanodelci

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back