izpis_h1_title_alt

Thermal hydraulic design of irradiation facility based on O-16 (n,p) N-16 activation in TRIGA reactor
ID Amano, Bernadeth Luzares (Author), ID Končar, Boštjan (Mentor) More about this mentor... This link opens in a new window, ID Suikkanen, Heikki (Comentor)

.pdfPDF - Presentation file, Download (7,51 MB)
MD5: B8F535654230DC15303C056CE94A5C0B

Abstract
Water, typically used as the primary coolant in facilities such as fusion and fission reactors, could be exposed to a large amount of neutrons causing water activation. This phenomenon could cause radiation damage to electrical components and increase the dose to personnel. As there are only few sources of gamma rays with energies in the range of 6 MeV and 7 MeV, an irradiation system using activated cooling water as a source of energetic gamma rays is proposed at the Jozef Stefan Institute (JSI) TRIGA Mark II research reactor. A water activation irradiation loop design is proposed, inserted into a radial piercing port of a research reactor. In this thesis, a numerical model of the irradiation loop was developed and a CFD analysis was performed using ANSYS CFX. Pressure and velocity profiles were established and will serve as design limits and criteria reference for assembling the actual facility. Moreover, the N-16 concentration inside the loop was studied. Its formation and decay inside the loop were predicted. This shall serve as reference for future experimental designs and further studies to be conducted using the proposed facility.

Language:English
Keywords:CFD analysis, water activation, irradiation facility, TRIGA
Work type:Master's thesis/paper
Typology:2.09 - Master's Thesis
Organization:FMF - Faculty of Mathematics and Physics
Year:2022
PID:20.500.12556/RUL-142337 This link opens in a new window
COBISS.SI-ID:127910659 This link opens in a new window
Publication date in RUL:30.10.2022
Views:697
Downloads:78
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Secondary language

Language:Slovenian
Title:Termo-hidravlična zasnova obsevalne zanke z aktivacijo O-16 (n,p) N-16 v TRIGA reaktorju
Abstract:
Voda s katero običajno hladimo fuzijske in fisijske reaktorje je lahko izpostavljena večji količini nevtronov in se pri tem aktivira. Sevanje zaradi aktivacije vode lahko povzroči poškodbe električnih komponent in poveča prejeto dozo za osebje. Ker obstaja le malo virov gama žarkov z energijami v območju med 6 MeV in 7 MeV, za preučevanje pojava na raziskovalnem reaktorju TRIGA Mark II na Institutu »Jožef Stefan« predlagajo obsevalni sistem z uporabo aktivirane vode kot vira gama žarkov. Predlagana je zasnova obsevalne zanke, ki je vstavljena v radialno odprtino raziskovalnega reaktorja. V tem magistrskem delu smo razvili numerični model obsevalne zanke in izvedli analizo s pomočjo programa za računalniško dinamiko tekočin (RDT) ANSYS CFX. Izračunali smo porazdelitve tlaka in hitrosti, ki bodo služile kot projektna osnova za dejansko izdelavo obsevalne zanke. Poleg tega smo proučevali obnašanje koncentracije izotopa dušika 16N v zanki. Pri tem smo upoštevali njegov nastanek in razpad znotraj zanke. Izračunane koncentracije dušika 16N bodo služile kot referenca za prihodnje zasnove eksperimentov in nadaljnje študije v predlagani obsevalni napravi.

Keywords:RDT analiza, aktivacija vode, obsevalna zanka, TRIGA

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back