Kontrola zobnikov z uporabo 3D skeniranja

Cvahte, Klara (author), Vukašinović, Nikola (mentor)

Tema predstavljene diplomska naloge je kontrolo polimernih zobnikov z uporabo 3D skeniranja. Obravnavan zobnik je bil izdelan s 3D tiskom in kasneje skeniran z obtičim skenerjem. Pridobljena trikotna mreža zobnikov je bila analizirana s programom, ki je bil razvit v laboratoriju LeCAD, za namen kontrole zobnikov. Končni rezultat vrednotenja je pokazal, da je metoda primerna za kontrolo zobnikov. Največjo napako končnim rezultatom je prispevala metoda izdelave zobnikov.

• Language: Slovenian
• Keywords: kontrola zobnikov, polimerni zobniki, 3D tiskanje, 3D skeniranje, trikotna mreža
• Work type: Final paper
• Typology: 2.11 - Undergraduate Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Place of publishing: Ljubljana
• Publisher: [K. Cvahte]
• Year: 2022
• Number of pages: XVI, 52 f.
• PID: 20.500.12556/RUL-140188
• UDC: 004.925.84:621.79(043.2)
• COBISS.SI-ID: 123665667
• Publication date in RUL: 13.09.2022

Secondary language

• Language: English
• Title: Gear control using 3d scanning

Abstract

The topic of the presented thesis is the control of polymer gears using 3D scanning. The gear in question was produced with 3D printing and later scanned with a 3D scanner. The obtained triangular mesh of gears was analyzed with a program developed in the LeCAD laboratory for the purpose of gear control. The final result of the analyzes showed that the method is suitable for gear control. The most significant error in the final results was contributed by the manufacturing method of the gears.

• Keywords: gear control, polymer gear, 3D printing, 3D scanning, triangular mesh