Analysis of floating objects based on non-intrusive measuring methods and machine learning

Škerjanec, Mateja (author), Kregar, Klemen (author), Štebe, Gašper (author), Rak, Gašper (author)

Floating objects in rivers and streams present a growing problem, not only as they may cause clogging of bridges and other hydraulic structures, and consequently floods, but also because they can have a diverse impact on river (and marine) ecosystems, either positive (in case of in-channel wood) or negative (in case of anthropogenic floating objects). To automatically identify different types of floating objects (i.e., wood pieces, EPS and XPS boards, and plastic and metal containers) and their volumes in an open channel, we propose a novel methodology based on non-intrusive measuring methods and machine learning. To this end, we tested the combination of an industrial 2D laser scanner, a high-speed camera, and an ultrasonic sensor. In the laboratory experiment, 36 samples were scanned separately, two to three times in a row, resulting in 77 raw LIDAR clouds and image sequences. Raw data were post-processed with custom-developed algorithms to determine the volumes of samples above the water surface and their intensity histograms. The latter were analyzed with the machine learning algorithm to distinguish between different material types of floating objects. For each of them, the material density was assigned. Based on the identified floating object's material type, pre-assigned density, and measured volume above the water surface, the sample volumes were calculated and compared with the actual ones determined before setting up the experiment. The results show that the proposed approach enables material recognition with accuracy higher than 90%. The average volume calculation error based on detected material type, assigned densities, and measured floating object's volume above the water surface is approx. 2%. The proposed methodology proved promising for automatic differentiation between different types of floating objects and remote measurement of their volume. To use the method in real-world applications (e.g., on bridges) for forecasting downstream quantities of floating objects, and consequently adjusting their management accordingly, additional measurements are needed, focusing on simultaneous scanning of multiple floating objects, under different flow conditions.

• Language: English
• Keywords: floating objects, laser scanning, machine learning, volume estimation
• Work type: Article
• Typology: 1.01 - Original Scientific Article
• Organization: FGG - Faculty of Civil and Geodetic Engineering
• Publication status: Published
• Publication version: Version of Record
• Year: 2022
• Number of pages: 12 str.
• Numbering: Vol. 408, art. 108254
• PID: 20.500.12556/RUL-137051
• UDC: 626/627
• ISSN on article: 0169-555X
• DOI: 10.1016/j.geomorph.2022.108254
• COBISS.SI-ID: 105599235
• Publication date in RUL: 31.05.2022

Record is a part of a journal

• Title: Geomorphology
• Shortened title: Geomorphology
• Publisher: Elsevier
• ISSN: 0169-555X
• COBISS.SI-ID: 9839621

Licences

• License: CC BY 4.0, Creative Commons Attribution 4.0 International
• Link: http://creativecommons.org/licenses/by/4.0/
• Description: This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.

Secondary language

• Language: Slovenian
• Keywords: plavje, lasersko skeniranje, strojno učenje, meritve volumna

Projects

• Funder: ARRS - Slovenian Research Agency
• Project number: P2-0180
• Name: Vodarstvo in geotehnika: orodja in metode za analize in simulacije procesov ter razvoj tehnologij

• Funder: ARRS - Slovenian Research Agency
• Project number: P2-0227
• Name: Geoinformacijska infrastruktura in trajnostni prostorski razvoj Slovenije