Investigation and optimization of MQL system parameters in the roller-burnishing process of hardened steel

Van, An-Le (author), Nguyen, Trung Thanh (author)

In the current study, the internal burnishing process under the minimum quantity lubrication (MQL) condition has been optimized to decrease the cylindricity (CYL) and circularity (CIC) of the burnished hole, while the surface roughness (SR) is predefined as a constraint. The optimizing inputs are the diameter of the spray nozzle (D), the spray elevation angle (A), the lubricant quantity (Q), and the pressure value of the compressed air (P). The artificial neural network (ANN) models of burnishing performances are proposed to optimise inputs. The grey relational analysis (GRA) is utilized to compute the weight value of each response. Optimal values of MQL system parameters and technological objectives are selected with the aid of an evolution algorithm (vibration and communication particle swarm optimization (VCPSO) algorithm). The results indicated that the optimal outcomes of the D, A, Q, and P are 1.5 mm, 50 deg, 140 ml/h, and 0.6 MPa, respectively. Furthermore, the CYL, CIC, and SR were decreased by 53.14 %, 57.83 %, and 72.97 %, respectively, at the optimal solution. Finally, the obtained results are expected to be a significant solution to support the machine operator in selecting the optimal MQL system parameters to improve the hole quality in the MQL-assisted burnishing process.

• Language: English
• Keywords: internal burnishing, cylindricity, circularity, roughness
• Work type: Article
• Typology: 1.01 - Original Scientific Article
• Organization: FS - Faculty of Mechanical Engineering
• Publication status: Published
• Publication version: Version of Record
• Publication date: 01.03.2022
• Year: 2022
• Number of pages: Str. 155-165
• Numbering: Vol. 68, no. 3
• PID: 20.500.12556/RUL-136401
• UDC: 669
• ISSN on article: 0039-2480
• DOI: 10.5545/sv-jme.2021.7473
• COBISS.SI-ID: 105627139
• Publication date in RUL: 29.04.2022

Record is a part of a journal

• Title: Strojniški vestnik
• Shortened title: Stroj. vestn.
• Publisher: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licences

• License: CC BY 4.0, Creative Commons Attribution 4.0 International
• Link: http://creativecommons.org/licenses/by/4.0/
• Description: This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.
• Licensing start date: 01.02.2022
• Applies to: Accepted for publication

Secondary language

• Language: Slovenian
• Title: Raziskava in optimizacija parametrov sistema mazanja z minimalno količino pri glajenju kaljenega jekla
• Keywords: notranje glajenje, cilindričnost, krožnost, hrapavost površin, steels

Projects

• Funder: Other - Other funder or multiple funders
• Funding programme: Vietnam National Foundation for Science and Technology Development (NAFOSTED)
• Project number: 107.04-2020.02